EVALUATION OF THE PROPERTIES OF LASER BEAM WELDING PROCESS

1Mohan Babu R, S. Suresh Kumar

107 Views
43 Downloads
Abstract:

This article is all about evaluating the laser beam welding process using the stainless steel samples using the recent mechanical testing methods. Here firstly the stainless steel workpieces (SS304 & SS410) are cut to the required dimension of (8cm width * 15cm length * 4mm thickness). Then the cut workpieces are welded using the laser beam welding machine on both the top and bottom layer respectively. After being welded the samples are tested with the mechanical testing methods like bending test, tensile test, etc. Then finally the results are taken from the test and they are to find the properties of laser beam welding process.

Keywords:

Laser beam, Stainless steel, Mechanical testing, Pulse Frequency.

Paper Details
Month3
Year2020
Volume24
IssueIssue 3
Pages4120-4125