A New Trend in Pneumatic Drilling Machine
DOI:
https://doi.org/10.61841/16n7qs41Keywords:
Pneumatic Drilling Machine, Pneumatic Double Acting Cylinder, Solenoid Valves, Object Sensor, Zigbee, Voice Recognition Sensor HM200, Microcontroller.Abstract
Our project aim is designing a voice operating pneumatic clamping device in drilling machine. In a normal drilling machine the machine vice is used to clamp the work piece. But it’s some difficult to hold the irregular work piece in certain position. Because of our two hands are used to position the work piece in the drilling machine. And then the external source is needed to fitting the job (or) work piece. For this purpose we provided voice operating pneumatic clamping device in drilling machine. Now a day the normal drilling machine is used in own small companies.
Downloads
References
[1] Sharmila S., Jeyanthi Rebecca L., Saduzzaman M., Biodegradation of domestic effluent using different solvent extracts of Murraya koenigii, Journal of Chemical and Pharmaceutical Research, V-5, I-2, PP:279- 282, 2013.
[2] Asiri S., Sertkol M., Guner S., Gungunes H., Batoo K.M., Saleh T.A., Sozeri H., Almessiere M.A., Manikandan A., Baykal A., Hydrothermal synthesis of Co y Zn y Mn 1-2y Fe 2 O 4 nanoferrites: Magneto- optical investigation, Ceramics International, V-44, I-5, PP:5751-5759, 2018.
[3] Jamuna Rani A., Mythili S.V., Study on total antioxidant status in relation to oxidative stress in type 2 diabetes mellitus, Journal of Clinical and Diagnostic Research, V-8, I-3, PP:108-110, 2014.
[4] Karthik B., Arulselvi, Noise removal using mixtures of projected gaussian scale mixtures, Middle - East Journal of Scientific Research, V-20, I-12, PP:2335-2340, 2014.
[5] Karthik B., Arulselvi, Selvaraj A., Test data compression architecture for lowpower vlsi testing, Middle - East Journal of Scientific Research, V-20, I-12, PP:2331-2334, 2014.
[6] Vijayaragavan S.P., Karthik B., Kiran Kumar T.V.U., Privacy conscious screening framework for frequently moving objects, Middle - East Journal of Scientific Research, V-20, I-8, PP:1000-1005, 2014.
[7] Kaliyamurthie K.P., Parameswari D., Udayakumar R., QOS aware privacy preserving location monitoring in wireless sensor network, Indian Journal of Science and Technology, V-6, I-SUPPL5, PP:4648-4652, 2013.
[8] Silambarasu A., Manikandan A., Balakrishnan K., Room-Temperature Superparamagnetism and Enhanced Photocatalytic Activity of Magnetically Reusable Spinel ZnFe2O4 Nanocatalysts, Journal of Superconductivity and Novel Magnetism, V-30, I-9, PP:2631-2640, 2017.
[9] Jasmin M., Vigneshwaran T., Beulah Hemalatha S., Design of power aware on chip embedded memory based FSM encoding in FPGA, International Journal of Applied Engineering Research, V-10, I-2, PP:4487- 4496, 2015.
[10] Philomina S., Karthik B., Wi-Fi energy meter implementation using embedded linux in ARM 9, Middle - East Journal of Scientific Research, V-20, I-12, PP:2434-2438, 2014.
[11] Vijayaragavan S.P., Karthik B., Kiran Kumar T.V.U., A DFIG based wind generation system with unbalanced stator and grid condition, Middle - East Journal of Scientific Research, V-20, I-8, PP:913-917, 2014.
[12] Brintha Rajakumari S., Nalini C., An efficient data mining dataset preparation using aggregation in relational database, Indian Journal of Science and Technology, V-7, PP:44-46, 2014.
[13] Karthik B., Kiran Kumar T.V.U., Vijayaragavan P., Bharath Kumaran E., Design of a digital PLL using
0.35μm CMOS technology, Middle - East Journal of Scientific Research, V-18, I-12, PP:1803-1806, 2013.
[14] Sudhakara P., Jagadeesh D., Wang Y., Venkata Prasad C., Devi A.P.K., Balakrishnan G., Kim B.S., Song J.I., Fabrication of Borassus fruit lignocellulose fiber/PP composites and comparison with jute, sisal and coir fibers, Carbohydrate Polymers, V-98, I-1, PP:1002-1010, 2013.
[15] Kanniga E., Sundararajan M., Modelling and characterization of DCO using pass transistors, Lecture Notes in Electrical Engineering, V-86 LNEE, I-VOL. 1, PP:451-457, 2011.
[16] Sachithanandam P., Meikandaan T.P., Srividya T., Steel framed multi storey residential building analysis and design, International Journal of Applied Engineering Research, V-9, I-22, PP:5527-5529, 2014.
[17] Kaliyamurthie K.P., Udayakumar R., Parameswari D., Mugunthan S.N., Highly secured online voting system over network, Indian Journal of Science and Technology, V-6, I-SUPPL.6, PP:4831-4836, 2013.
[18] Sathyaseelan B., Manikandan E., Lakshmanan V., Baskaran I., Sivakumar K., Ladchumananandasivam R., Kennedy J., Maaza M., Structural, optical and morphological properties of post-growth calcined TiO 2 nanopowder for opto-electronic device application: Ex-situ studies, Journal of Alloys and Compounds, V- 671, PP:486-492, 2016.
[19] Saravanan T., Sundar Raj M., Gopalakrishnan K., SMES technology, SMES and facts system, applications, advantages and technical limitations, Middle - East Journal of Scientific Research, V-20, I-11, PP:1353- 1358, 2014.
[20] Jeyanthi Rebecca L., Sharmila S., Das M.P., Seshiah C., Extraction and purification of carotenoids from vegetables, Journal of Chemical and Pharmaceutical Research, V-6, I-4, PP:594-598, 2014.
[21] Udayakumar R., Khanaa V., Saravanan T., Saritha G., Retinal image analysis using curvelet transform and multistructure elements morphology by reconstruction, Middle - East Journal of Scientific Research, V-16, I-12, PP:1781-1785, 2013.
[22] Karthik B., Kiran Kumar T.V.U., EMI developed test methodologies for short duration noises, Indian Journal of Science and Technology, V-6, I-SUPPL5, PP:4615-4619, 2013.
[23] Bomila R., Srinivasan S., Gunasekaran S., Manikandan A., Enhanced photocatalytic degradation of methylene blue dye, opto-magnetic and antibacterial behaviour of pure and la-doped ZnO nanoparticles, Journal of Superconductivity and Novel Magnetism, V-31, I-3, PP:855-864, 2018.
[24] Manikandan A., Mani M.P., Jaganathan S.K., Rajasekar R., Jagannath M., Formation of functional nanofibrous electrospun polyurethane and murivenna oil with improved haemocompatibility for wound healing, Polymer Testing, V-61, PP:106-113, 2017.
[25] Saravanan T., Sundar Raj M., Gopalakrishnan K., Comparative performance evaluation of some fuzzy and classical edge operators, Middle - East Journal of Scientific Research, V-20, I-12, PP:2633-2633, 2014.
[26] Karthik B., Kiran Kumar T.V.U., Authentication verification and remote digital signing based on embedded arm (LPC2378) platform, Middle - East Journal of Scientific Research, V-20, I-12, PP:2341-2345, 2014.
[27] Gopalakrishnan K., Sundar Raj M., Saravanan T., Multilevel inverter topologies for high-power applications, Middle - East Journal of Scientific Research, V-20, I-12, PP:1950-1956, 2014.
[28] Sakthipriya N., An effective method for crop monitoring using wireless sensor network, Middle - East Journal of Scientific Research, V-20, I-9, PP:1127-1132, 2014.
[29] Vijayaragavan S.P., Karthik B., Kiran Kumar T.V.U., Effective routing technique based on decision logic for open faults in fpgas interconnects, Middle - East Journal of Scientific Research, V-20, I-7, PP:808-811, 2014.
[30] Kanniga E., Selvaramarathnam K., Sundararajan M., Kandigital bike operating system, Middle - East Journal of Scientific Research, V-20, I-6, PP:685-688, 2014.
[31] Sundararajan M., Optical instrument for correlative analysis of human ECG and breathing signal, International Journal of Biomedical Engineering and Technology, V-6, I-4, PP:350-362, 2011. Khanaa V., Thooyamani K.P., Saravanan T., Simulation of an all optical full adder using optical switch, Indian Journal of Science and Technology, V-6, I-SUPPL.6, PP:4733-4736, 2013.
[32] Slimani Y., Baykal A., Amir M., Tashkandi N., Güngüneş H., Guner S., El Sayed H.S., Aldakheel F., Saleh T.A., Manikandan A., Substitution effect of Cr 3+ on hyperfine interactions, magnetic and optical properties of Sr-hexaferrites, Ceramics International, V-44, I-13, PP:15995-16004, 2018.
[33] Suguna S., Shankar S., Jaganathan S.K., Manikandan A., Novel Synthesis of Spinel Mn x Co 1−x Al 2 O 4 (x = 0.0 to 1.0) Nanocatalysts: Effect of Mn 2+ Doping on Structural, Morphological, and Opto-Magnetic Properties, Journal of Superconductivity and Novel Magnetism, V-30, I-3, PP:691-699, 2017.
[34] Mathubala G., Manikandan A., Arul Antony S., Ramar P., Enhanced photocatalytic activity of spinel CuxMn1-xFe2O4 nanocatalysts for the degradation of methylene blue dye and opto-magnetic properties, Nanoscience and Nanotechnology Letters, V-8, I-5, PP:375-381, 2016.
[35] Kumaravel A., Dutta P., Application of Pca for context selection for collaborative filtering, Middle - East Journal of Scientific Research, V-20, I-1, PP:88-93, 2014.
[36] Krishnamoorthy P., Jayalakshmi T., Preparation, characterization and synthesis of silver nanoparticles by using phyllanthusniruri for the antimicrobial activity and cytotoxic effects, Journal of Chemical and Pharmaceutical Research, V-4, I-11, PP:4783-4794, 2012.
[37] Amir M., Gungunes H., Slimani Y., Tashkandi N., El Sayed H.S., Aldakheel F., Sertkol M., Sozeri H., Manikandan A., Ercan I., Baykal A., Mössbauer Studies and Magnetic Properties of Cubic CuFe 2 O 4 Nanoparticles, Journal of Superconductivity and Novel Magnetism, V-32, I-3, PP:557-564, 2019.
[38] Raj M.S., Saravanan T., Srinivasan V., A modified direct torque control of induction motor using space vector modulation technique, Middle - East Journal of Scientific Research, V-20, I-11, PP:1572-1574, 2014.
[39] Khanaa V., Thooyamani K.P., Using triangular shaped stepped impedance resonators design of compact microstrip quad-band, Middle - East Journal of Scientific Research, V-18, I-12, PP:1842-1844, 2013.
[40] Asiri S., Sertkol M., Güngüneş H., Amir M., Manikandan A., Ercan I., Baykal A., The Temperature Effect on Magnetic Properties of NiFe 2 O 4 Nanoparticles, Journal of Inorganic and Organometallic Polymers and Materials, V-28, I-4, PP:1587-1597, 2018.
[41] Anand, K., Palanisamy, T., & Loganathan, R. (2014). Analysis of Torque Ripple and Speed Control of Five Phase BLDC Motor. International Scientific Journal on Science Engineering & Technology, 17(9), 886-892.
[42] Niranjana Murthy, H.S., & Dr.Meenakshi, M. (2015). ANN, SVM and KNN Classifiers for Prognosis of Cardiac Ischemia- A Comparison. Bonfring International Journal of Research in Communication Engineering, 5(2), 7-11.
[43] Sakuma, H. (2013). Improvement of One-shot FringeProjection for Shape Measurement. The SIJ Transactions on Computer Science Engineering & its Applications, 1(5), 7-11.
[44] Vidhya, K., & Saravanan, N. (2018). Enhanced Automatically Mining Facets for Queries and Clustering with Side Information Model. Bonfring International Journal of Software Engineering and Soft Computing, 8(2), 1-6.
[45] Aodsup, K., & Kulworawanichpong, T. (2014).FDTD Method for Lightning Surge Propagation of Power Transmission Lines. The SIJ Transactions on Computer Networks & Communication Engineering (CNCE), 2(4), 7-11.
[46] Sulyukova. (2019). Analysis of Low power and reliable XOR-XNOR circuit for high Speed Applications.
Journal of VLSI Circuits And Systems, 1(1), 23-26.
[47] Deshpande, G.B., & Dr. Ramesha, K. (2015). MRI Brain Image Enhancement Using XILINX System Generator and DWT. Bonfring International Journal of Advances in Image Processing, 5(2), 16-22.
[48] Salimoddin, & Mohammed, A.M. (2018). Design of Error Detection Reed Solomon Codes at the Receiver.Journal of Computational Information Systems, 14(4), 1 - 6.
[49] Raj Raghul, S. (2014). A General View about Grid Computing and Its Concepts. International Journal of Advances in Engineering and Emerging Technology, 5(5), 225-233.
[50] Saranya, K., & Rajesh Kumar, B. (2015). Design and Implementation of GCPV System Based on GGC in Symmentrical LMV Network for Grid Stabilization. Excel International Journal of Technology, Engineering and Management, 2(1), 19-21.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
