Nanocomposite Coatings on Tribological Application in Automotive Engine
DOI:
https://doi.org/10.61841/c5h2em46Keywords:
Hard Coatings, Nanoindentation, Tungsten Nitride, Reactive Sputtering, PVDAbstract
The structure, hardness, grinding and wear of tungsten nitrides arranged by DC receptive magnetron sputtering were researched. The coatings were stored with various nitrogen to argon proportions; the aggregate weight was kept consistent. The tribological tests were performed on the covered example in earthbound air with SS304 stainless steel. The coatings showed diverse stages as a component of the nitrogen content: movies with low N content displayed the α-W stage; β-W stage was prevailing for nitrogen substance from 7 to 10 at.% and β-W2N was watched for nitrogen content at 15at.%. We report the readiness of tungsten nitride movies developed by receptive sputtering in the encompassing N2/Ar blend at different weights on stainless steel substrates at different constant temperatures. The structural property is analysed using XRD, mechanical properties are evaluated by nano indentation and metallurgical properties by AFM, EDAX in view of the affidavit conditions. The relationship between the microstructure and mechanical properties is talked about. The mechanical and tribological properties of the tungsten nitride coatings were unequivocally affected by the structure. The hardness and the Young's modulus qualities were in the reaches (27–39GPa) and (239-280GPa), individually; the most minimal qualities compare to the coatings with the most astounding nitrogen content.
For the most part, the grating and wear rate of tungsten nitride coatings sliding against fumes gas expanded with nitrogen content achieving a greatest at 12 at.%; additionally increment of the nitrogen content prompted to a reduction of the erosion and wear.
Downloads
References
[1] Das J., Paul Das M., Velusamy P., Sesbania grandiflora leaf extract mediated green synthesis of antibacterial silver nanoparticles against selected human pathogens, Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, V-104, PP:265-270, 2013.
[2] Umanath K., Palanikumar K., Selvamani S.T., Analysis of dry sliding wear behaviour of Al6061/SiC/Al 2 O 3 hybrid metal matrix composites, Composites Part B: Engineering, V-53, PP:159-168, 2013.
[3] Udayakumar R., Khanaa V., Saravanan T., Saritha G., Cross layer optimization for wireless network (WIMAX), Middle - East Journal of Scientific Research, V-16, I-12, PP:1786-1789, 2013.
[4] Kumarave A., Rangarajan K., Algorithm for automaton specification for exploring dynamic labyrinths, Indian Journal of Science and Technology, V-6, I-SUPPL5, PP:4554-4559, 2013.
[5] Pieger S., Salman A., Bidra A.S., Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: A systematic review, Journal of Prosthetic Dentistry, V-112, I-1, PP:22-30, 2014.
[6] Vijayaraghavan K., Nalini S.P.K., Prakash N.U., Madhankumar D., One step green synthesis of silver nano/microparticles using extracts of Trachyspermum ammi and Papaver somniferum, Colloids and Surfaces B: Biointerfaces, V-94, PP:114-117, 2012.
[7] Khanaa V., Mohanta K., Saravanan T., Comparative study of uwb communications over fiber using direct and external modulations, Indian Journal of Science and Technology, V-6, I-SUPPL.6, PP:4845-4847, 2013.
[8] Khanaa V., Thooyamani K.P., Udayakumar R., Cognitive radio based network for ISM band real time embedded system, Middle - East Journal of Scientific Research, V-16, I-12, PP:1798-1800, 2013.
[9] Vijayaraghavan K., Nalini S.P.K., Prakash N.U., Madhankumar D., Biomimetic synthesis of silver nanoparticles by aqueous extract of Syzygium aromaticum, Materials Letters, V-75, PP:33-35, 2012.
[10] Caroline M.L., Sankar R., Indirani R.M., Vasudevan S., Growth, optical, thermal and dielectric studies of an amino acid organic nonlinear optical material: l-Alanine, Materials Chemistry and Physics, V-114, I-1, PP:490-494, 2009.
[11] Kumaravel A., Pradeepa R., Efficient molecule reduction for drug design by intelligent search methods, International Journal of Pharma and Bio Sciences, V-4, I-2, PP:B1023-B1029, 2013.
[12] Kaviyarasu K., Manikandan E., Kennedy J., Jayachandran M., Ladchumananandasiivam R., De Gomes U.U., Maaza M., Synthesis and characterization studies of NiO nanorods for enhancing solar cell efficiency using photon upconversion materials, Ceramics International, V-42, I-7, PP:8385-8394, 2016.
[13] Sengottuvel P., Satishkumar S., Dinakaran D., Optimization of multiple characteristics of EDM parameters based on desirability approach and fuzzy modeling, Procedia Engineering, V-64, PP:1069-1078, 2013.
[14] Anbuselvi S., Chellaram C., Jonesh S., Jayanthi L., Edward J.K.P., Bioactive potential of coral associated gastropod, Trochus tentorium of Gulf of Mannar, Southeastern India, Journal of Medical Sciences, V-9, I-5, PP:240-244, 2009.
[15] Kaviyarasu K., Ayeshamariam A., Manikandan E., Kennedy J., Ladchumananandasivam R., Umbelino Gomes U., Jayachandran M., Maaza M., Solution processing of CuSe quantum dots: Photocatalytic activity under RhB for UV and visible-light solar irradiation, Materials Science and Engineering B: Solid-State Materials for Advanced Technology, V-210, PP:1-9, 2016.
[16] Kumarave A., Udayakumar R., Web portal visits patterns predicted by intuitionistic fuzzy approach, Indian Journal of Science and Technology, V-6, I-SUPPL5, PP:4549-4553, 2013.
[17] Srinivasan V., Saravanan T., Reformation and market design of power sector, Middle - East Journal of Scientific Research, V-16, I-12, PP:1763-1767, 2013.
[18] Kaviyarasu K., Manikandan E., Kennedy J., Maaza M., A comparative study on the morphological features of highly ordered MgO:AgO nanocube arrays prepared via a hydrothermal method, RSC Advances, V-5, I- 100, PP:82421-82428, 2015.
[19] Kumaravel A., Udhayakumarapandian D., Consruction of meta classifiers for apple scab infections, International Journal of Pharma and Bio Sciences, V-4, I-4, PP:B1207-B1213, 2013.
[20] Leena Sankari S., Masthan K.M.K., Aravindha Babu N., Bhattacharjee T., Elumalai M., Apoptosis in cancer
- an update, Asian Pacific Journal of Cancer Prevention, V-13, I-10, PP:4873-4878, 2012.
[21] Harish B.N., Menezes G.A., Antimicrobial resistance in typhoidal salmonellae, Indian Journal of Medical Microbiology, V-29, I-3, PP:223-229, 2011.
[22] Manikandan A., Manikandan E., Meenatchi B., Vadivel S., Jaganathan S.K., Ladchumananandasivam R., Henini M., Maaza M., Aanand J.S., Rare earth element (REE) lanthanum doped zinc oxide (La: ZnO) nanomaterials: Synthesis structural optical and antibacterial studies, Journal of Alloys and Compounds, V- 723, PP:1155-1161, 2017.
[23] Caroline M.L., Vasudevan S., Growth and characterization of an organic nonlinear optical material: l- alanine alaninium nitrate, Materials Letters, V-62, I-15, PP:2245-2248, 2008.
[24] Saravanan T., Srinivasan V., Udayakumar R., A approach for visualization of atherosclerosis in coronary artery, Middle - East Journal of Scientific Research, V-18, I-12, PP:1713-1717, 2013.
[25] Poongothai S., Ilavarasan R., Karrunakaran C.M., Simultaneous and accurate determination of vitamins B 1
, B 6 , B 12 and alpha-lipoic acid in multivitamin capsule by reverse-phase high performance liquid chromatographic method, International Journal of Pharmacy and Pharmaceutical Sciences, V-2, I-SUPPL. 4, PP:133-139, 2010.
[26] Udayakumar R., Khanaa V., Saravanan T., Synthesis and structural characterization of thin films of sno 2 prepared by spray pyrolysis technique, Indian Journal of Science and Technology, V-6, I-SUPPL.6, PP:4754-4757, 2013.
[27] Anbazhagan R., Satheesh B., Gopalakrishnan K., Mathematical modeling and simulation of modern cars in the role of stability analysis, Indian Journal of Science and Technology, V-6, I-SUPPL5, PP:4633-4641, 2013.
[28] Caroline M.L., Vasudevan S., Growth and characterization of bis thiourea cadmium iodide: A semiorganic single crystal, Materials Chemistry and Physics, V-113, I-43499, PP:670-674, 2009.
[29] Sharmila S., Jeyanthi Rebecca L., Das M.P., Production of Biodiesel from Chaetomorpha antennina and Gracilaria corticata, Journal of Chemical and Pharmaceutical Research, V-4, I-11, PP:4870-4874, 2012.
[30] Thooyamani K.P., Khanaa V., Udayakumar R., An integrated agent system for e-mail coordination using jade, Indian Journal of Science and Technology, V-6, I-SUPPL.6, PP:4758-4761, 2013.
[31] Lydia Caroline M., Kandasamy A., Mohan R., Vasudevan S., Growth and characterization of dichlorobis l- proline Zn(II): A semiorganic nonlinear optical single crystal, Journal of Crystal Growth, V-311, I-4, PP:1161-1165, 2009.
[32] Lydia Caroline M., Vasudevan S., Growth and characterization of l-phenylalanine nitric acid, a new organic nonlinear optical material, Materials Letters, V-63, I-1, PP:41-44, 2009.
[33] Kaviyarasu K., Fuku X., Mola G.T., Manikandan E., Kennedy J., Maaza M., Photoluminescence of well- aligned ZnO doped CeO 2 nanoplatelets by a solvothermal route, Materials Letters, V-183, PP:351-354, 2016.
[34] Saravanan T., Saritha G., Buck converter with a variable number of predictive current distributing method, Indian Journal of Science and Technology, V-6, I-SUPPL5, PP:4583-4588, 2013.
[35] Parthasarathy R., Ilavarasan R., Karrunakaran C.M., Antidiabetic activity of Thespesia Populnea bark and leaf extract against streptozotocin induced diabetic rats, International Journal of PharmTech Research, V-1, I-4, PP:1069-1072, 2009.
[36] Kerana Hanirex D., Kaliyamurthie K.P., Multi-classification approach for detecting thyroid attacks, International Journal of Pharma and Bio Sciences, V-4, I-3, PP:B1246-B1251, 2013.
[37] Kandasamy A., Mohan R., Caroline M.L., Vasudevan S., Nucleation kinetics, growth, solubility and dielectric studies of L-proline cadmium chloride monohydrate semi organic nonlinear optical single crystal, Crystal Research and Technology, V-43, I-2, PP:186-192, 2008.
[38] Srinivasan V., Saravanan T., Udayakumar R., Specific absorption rate in the cell phone user's head, Middle - East Journal of Scientific Research, V-16, I-12, PP:1748-1750, 2013.
[39] Udayakumar R., Khanaa V., Saravanan T., Chromatic dispersion compensation in optical fiber communication system and its simulation, Indian Journal of Science and Technology, V-6, I-SUPPL.6, PP:4762-4766, 2013.
[40] Vijayaragavan S.P., Karthik B., Kiran T.V.U., Sundar Raj M., Robotic surveillance for patient care in hospitals, Middle - East Journal of Scientific Research, V-16, I-12, PP:1820-1824, 2013.
[41] Gupta, T., & Sharma, A. (2014). Search Accuracy in Web information Retrieval. International Journal of Communication and Computer Technologies, 2(2), 98-105.
[42] Kakavand, Z.M., & Chalechale, A. (2015). Comparison of Two Different Distance Functions of Image Retrieval for Detecting Species of Microscopic Fungi in Medical Mycology Laboratory. International Academic Journal of Science and Engineering, 2(4), 39-44.
[43] Ramya, V., Ranjitha, S., Sathya Sofia, A., & Ganesh Kumar, P. (2014). Load Balancing of Tasks in Cloud Computing Environment Using Honey Bee Behavior. International Journal of System Design and Information Processing, 2(2), 25-53.
[44] Brindha, M.S. (2017). A Survey on Cross Layer Distributed Topology Control in Mobile Adhoc Network.
Bonfring International Journal of Networking Technologies and Applications, 4(1), 1-3.
[45] Kumar, P. (2014). Load Characteristics of Electric System for Distributing Power on Locality Based Criterion. Bonfring International Journal of Power Systems and Integrated Circuits, 4(4), 39-43.
[46] Rama Rao, G., Purna Prakash, J., & Rama Raju, M. (2014). Designing High to Low Cost Solution for Crash Recovery of Servers through Virtualization using Cloud Computing. International Scientific Journal on Science Engineering & Technology, 17(5), 549-555.
[47] Arul Jothy, K., Sivakumar, K., & Delsey, M.J. (2018). Distributed System Framework for Mobile Cloud Computing. Bonfring International Journal of Research in Communication Engineering, 8(1), 5-9.
[48] Kabeer, V., & Zainul Abid, T.P. (2013). Automated Face Recognition using Artificial Light Receptor Model and SVM Classifier. The SIJ Transactions on Computer Science Engineering & its Applications, 1(3), 36- 41.
[49] Yasvanthkumaar, V., Sabitha, S., & NithyaKalyani, S. (2018). Parallel and Multiple E-Data Distributed Process with Progressive Duplicate Detection Model. Bonfring International Journal of Software Engineering and Soft Computing, 8(1), 23-25.
[50] Kanaga Sundar, R., Joe Paul, J., Krishna Kumar, M., & Laser, L. (2014).Secured POR for Flooding Attack Prevention in Extremely Dynamic Ad Hoc Networks. The SIJ Transactions on Computer Networks & Communication Engineering (CNCE), 2(2), 5-9.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
