Enhancing the Learning Outcomes of Automotive Electrical Wiring Diagram through Android Simulation – A Conceptual Design for Automotive Vocational School
DOI:
https://doi.org/10.61841/s4dqzz97Keywords:
Automotive electrical wiring diagram, Vocational School, Generation Z, Learning MediaAbstract
The implementation of technology in the learning process must be implemented as a real effort to improve the quality of education in the industrial era 4.0. Technology can be utilized to achieve adequate learning outcomes that conform to the student’s characteristics at present. This article discusses the application of technology in the learning process for an automotive vocational school. The designed application is a game-based challenge which able to installed either in a mobile telephone or computer for learning the automotive electrical wiring diagram. As technology develops in vehicles that utilize a lot of electrical and computer systems, thus the outcomes in automotive vocational schools must be adjusted to real conditions in the field. The automotive electrical system is an essential lesson for automotive vocational education, and it requires a depth understanding of the student, which trains the student’s high order thinking skills. In order to maximize the learning process, the authors and teams design a game-based application on a mobile phone for the automotive electrical wiring diagram course. The application was developed according to the current student’s characteristics which familiar with the mobile phone. The goals of the concept are to improve the learning process and ease of use for teachers and students during the class activities. The application is designed based on the automotive electrical wiring standard. After the initial test, the authors and teams found this concept can attract students' interest in learning the automotive electrical system even though the topic is considered as difficult level (High Order Thinking) and gives positive results in achieving the target of learning outcomes.
Downloads
References
1. A. W. Khurniawan, G. Erda, and Muh. A. Majid, ‘Profil Lulusan SMK terhadap Tingkat Penyerapan Tenaga Kerja Indonesia Tahun 2018-2019’, Vocat. Educ. Policy White Pap., vol. 1, no. 9, p. 2019, 2019, doi: S0042-6989(10)00562-6 [pii]r10.1016/j.visres.2010.11.009.
2. Tarma, ‘Corporate Vocational School: Strategi Antisipatif Menghadapi Pengangguran Lulusan SMK dalam Perspektif Bonus Demografi’, J. Din. Manaj. Pendidik., vol. 1, no. 1, pp. 1–6, 2016, doi: 10.1016/j.bbapap.2013.06.007.
3. M. Nurtanto, H. Sofyan, P. Pardjono, and S. Suyitno, ‘Development model for competency improvement and national vocational qualification support frames in automotive technology’, Int. J. Eval. Res. Educ., vol. 9, no. 1, pp. 168–176, 2020, doi: 10.11591/ijere.v9i1.20447.
4. Z. Arifin, M. Nurtanto, W. Warju, R. Rabiman, and N. Kholifah, ‘The TAWOCK Conceptual Model for Content Knowledge for Professional Teaching in Vocational Education’, Int. J. Eval. Res. Educ. IJERE, vol. 9, no. 3, Apr. 2020, doi: 10.11591/ijere.v9i3.20561.
5. A. Dolot, ‘The characteristics of Generation Z’, E-Mentor, vol. 2, no. 74, pp. 44–50, 2018, doi: 10.15219/em74.1351.
6. D. Schwieger and C. Ladwig, ‘Reaching and Retaining the Next Generation: Adapting to the Expectations of Gen Z in the Classroom.’, Inf. Syst. Educ. J., vol. 16, no. 3, pp. 45–54, 2018.
7. S. Gaidhani, L. Arora, and B. K. Sharma, ‘Understanding the attitude of generation Z towards workplace’, Int. J. Manag. Technol. Eng., vol. 9, no. 1, pp. 2804–2812, 2019.
8. V. Hatisaru and A. G. Küçükturan, ‘Vocational and technical education problem-based learning exercise: sample scenario’, Procedia - Soc. Behav. Sci., vol. 1, no. 1, pp. 1944–1948, 2009, doi: 10.1016/j.sbspro.2009.01.342.
9. A. Ahmad and N. A. Latib, ‘Teaching in Automotive Practical Task: Practices in Vocational Colleges’, Procedia - Soc. Behav. Sci., vol. 204, no. November 2014, pp. 290–299, 2015, doi: 10.1016/j.sbspro.2015.08.155.
10. J. Parkinson and J. Mackay, ‘The literacy practices of vocational training in Carpentry and Automotive Technology’, J. Vocat. Educ. Train., vol. 68, no. 1, pp. 33–50, 2016, doi: 10.1080/13636820.2015.1104714.
11. I. M. Said, E. Sutadji, and M. Sugandi, ‘The scientific approach-based cooperative learning tool for vocational students vocation program of autotronic (automotive electronic) engineering’, IOSR J. Res. Method Educ. IOSR-JRME, vol. 6, no. 3, pp. 67–73, 2016, doi: 10.9790/7388-0603046773.
12. M. Nurtanto, S. Nurhaji, D. Widjanarko, M. B. R. Wijaya, and H. Sofyan, ‘Comparison of Scientific Literacy in Engine Tune-up Competencies through Guided Problem-Based Learning and Non-Integrated Problem-Based Learning in Vocational Education’, presented at the Journal of Physics: Conference Series, 2018, vol. 1114, no. 1, doi: 10.1088/1742-6596/1114/1/012038.
13. M. Nurtanto, D. Widjanarko, H. Sofyan, R. Rabiman, and M. B. Triyono, ‘Learning by creating: Transforming automotive electrical textual material into visual animation as a creative learning products (clp)’, Int. J. Sci. Technol. Res., vol. 8, no. 10, pp. 1634–1642, 2019.
14. E. A. Llanes Cedeño, J. C. Rocha - Hoyos, D. B. Peralta Zurita, J. M. Gómez, and S. C. Celi Ortega, ‘Project-based learning case of study education in automotive mechanical engineering’, Espacios, vol. 39, no. 25, 2018.
15. J. Ma, ‘Design and Implementation of Mobile Learning System for Soldiers’ Vocational Skill Identification Based on Android’, IOP Conf. Ser. Mater. Sci. Eng., vol. 242, no. 1, 2017, doi: 10.1088/1757-899X/242/1/012119.
16. N. Ordaz, D. Romero, D. Gorecky, and H. R. Siller, ‘Serious Games and Virtual Simulator for Automotive Manufacturing Education & Training’, Procedia Comput. Sci., vol. 75, no. Vare, pp. 267–274, 2015, doi: 10.1016/j.procs.2015.12.247.
17. D. J. Belton, ‘Teaching process simulation using video-enhanced and discovery/inquiry-based learning: Methodology and analysis within a theoretical framework for skill acquisition’, Educ. Chem. Eng., vol. 17, no. 2002, pp. 54–64, 2016, doi: 10.1016/j.ece.2016.08.003.
18. O. Kaplan and F. Issi, ‘An android based application and simulation of multiple photovoltaic panels’, 2017 6th Int. Conf. Renew. Energy Res. Appl. ICRERA 2017, vol. 2017-Janua, pp. 925–930, 2017, doi: 10.1109/ICRERA.2017.8191195.
19. R. Juchem and B. Knorr, ‘Complete automotive electrical system design’, IEEE Veh. Technol. Conf., vol. 58, no. 5, pp. 3262–3266, 2003, doi: 10.1109/vetecf.2003.1286257.
20. M. Abbas, A. A. Ferri, M. E. Orchard, and G. J. Vachtsevanos, ‘An intelligent diagnostic/prognostic framework for automotive electrical systems’, IEEE Intell. Veh. Symp. Proc., pp. 352–357, 2007, doi: 10.1109/ivs.2007.4290139.
21. A. Qattawi, P. Venhovens, and J. Brooks, ‘Rethinking automotive engineering education - Deep orange as a collaborative innovation framework for project-based learning incorporating real-world case studies’, ASEE Annu. Conf. Expo. Conf. Proc., 2014.
22. M. Nurtanto, P. Pardjono, Widarto -, and S. D. Ramdani̇, ‘The Effect of STEM-EDP in Professional Learning on Automotive Engineering Competence in Vocational High School’, J. Educ. Gift. Young Sci., vol. 8, no. 2,
pp. 633–649, Jun. 2020, doi: 10.17478/jegys.645047.
23. A. Bencsik, T. Juhász, and G. Horváth-Csikós, ‘Y and Z Generations at Workplaces’, J. Compet., vol. 6, no. 3, pp. 90–106, 2016, doi: 10.7441/joc.2016.03.06.
24. D. Dwidienawati and D. Gandasari, ‘Understanding Indonesia’s generation Z’, Int. J. Eng. Technol., vol. 7, no. 3, pp. 250–252, 2018, doi: 10.14419/ijet.v7i3.25.17556.
25. A. Singh, ‘Challenges and Issues of Generation Z’, IOSR J. Bus. Manag., vol. 16, no. 7, pp. 59–63, 2014, doi: 10.9790/487x-16715963.
26. M. Nurtanto, ‘Designing ignition system based ergonomic teaching aid in vocational education: Minimizing fatigue factors during practice’, Int. J. Sci. Technol. Res., vol. 8, no. 11, pp. 300–303, 2019.
27. W. Warju, S. R. Ariyanto, S. Soeryanto, R. S. Hidayatullah, and M. Nurtanto, ‘Practical Learning Innovation: Real Condition Video-Based Direct Instruction Model in Vocational Education’, J. Educ. Sci. Technol. EST, vol. 6, no. 1, pp. 79–91, Mar. 2020, doi: 10.26858/est.v6i1.12665.
28. M. A. Hamid, E. Permata, D. Aribowo, I. A. Darmawan, M. Nurtanto, and S. Laraswati, ‘Development of cooperative learning based electric circuit kit trainer for basic electrical and electronics practice’, presented at the Journal of Physics: Conference Series, 2020, vol. 1456, no. 1, doi: 10.1088/1742-6596/1456/1/012047.
29. A. Fedorov and A. Levitskaya, ‘Technology of Integrated Media Education’, Media Educ. Mediaobrazovanie, vol. 58, no. 4, 2018, doi: 10.13187/me.2018.4.3.
30. H. Suh, ‘Collaborative Learning Models and Support Technologies in the Future Classroom’, Int. J. Educ. Media Technol., vol. 5, no. 1, pp. 50–61, 2011.
31. A. Puspita Sari and A. Setiawan, ‘The Development of Internet-Based Economic Learning Media using Moodle Approach’, Int. J. Act. Learn., vol. 3, no. 2, pp. 100–109, 2018.
32. J. S. Liang, ‘A web-based training framework in automotive electric education’, Comput. Appl. Eng. Educ., vol. 18, no. 4, pp. 619–633, 2010, doi: 10.1002/cae.20257.
33. A. W. Hongyu, B. Y. Yupeng, and C. M. Chuamg, ‘A Modeling Method of Whole Vehicle Electrical Balance Simulation System Based on Neural Network Training’, IFAC-Pap., vol. 51, no. 31, pp. 87–91, 2018, doi: 10.1016/j.ifacol.2018.10.017.
34. J. S. Liang, ‘A process-based automotive troubleshooting service and knowledge management system in collaborative environment’, Robot. Comput.-Integr. Manuf., vol. 61, no. July 2019, p. 101836, 2020, doi: 10.1016/j.rcim.2019.101836.
35. S. Suyitno, J. Dwi, S. Arif, dan P. Aci, “Trainer Stand Instructional Media of Wiring System for Kijang Car to Improve Student Achievement in Vocational Higher Education,” Jour Adv Res. Dyn. Control Syst., vol. 11, no. 11, 2019, doi: 10.5373/JARDCS/V11SP11/20193126.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
