Design and implementation of multi-core cable tester with multi analyzer
DOI:
https://doi.org/10.61841/4v1nt485Keywords:
IEC (International Electro-technical commission), OC(Open circuit), SC(short circuit), SQ(sequence test), IOT(Internet of things), DB(data Bus)Abstract
In this paper presented a cable tester in a single desk to improve the timing of the checking the quality of cable in single desk. Cabling is an important and expensive in business and mostly it treated in safe manner. Normally structured cabling design and placing is over viewed by a predefined standards specified by wiring data centers, commercial places and communication cable for data or voice. An IEC stands for a type of electronic cable that meets different standards and different specification. The major objective of cables is to give the physical linkage of Electronic/Electrical appliance to its power/data sources. A predefined set of templates the system could check and verify correctly and quickly by analysing the cable various faults in single desk, open circuit test, short circuit test, sequence test. In order to improve the outcome of the product in single day the above test will complete the task with duration of minimum 2 minutes and maximum 7 minutes based on the number of sockets/ports and these activities are monitoring and updates in cloud through IOT for statistics analysis of quality and quantity.
Downloads
References
1. H. kesim, “Automated continuity testing of flexible backplanes using a cable tester”, IEEE Autotestcon, pp. 269-277, 2015.
2. M. Gong, Y. Dong, “A disturbed cable harness tester based on CAN bus”, Int. Conf. On Electric Information and control Engineering, pp.2861- 286, 2011.
3. Li Hongwei, Lin Yuchi, Zheng Tong at al, “Research on new portable cable fast testing technology,” Machine Tool and Hydraulies, vol,35, pp,106-107, 2007.
4. Yang Fenwei, “Automatic detection system for electrical propertie of interconnections devices,” Proceeding of the eighth academic conferences of connectors and switches of component society of china Electronics society, pp,116-117, 2004.
5. Pan Dawei, Sun Hongtao, Dai YongShout, “Design of a portable cable detection device,” Electronic Design Engineering, vol,17, pp.142-145, 2017.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
