Smart pulse oximeter systems for spo2 measurement based on IOT

Authors

  • L. K. Hema Associate Professor, ECE Department, Aarupadai Veedu Institute of Technology,Vinayaka Mission’s Research Foundation, Deemed to be UniversityIndia Author
  • R. Mohana Priya Assistant Professor, ECE Department, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University India Author
  • Rajat Kumar Dwibedi Assistant Professor, ECE Department, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University India Author
  • J Vijay Assistant Professor, ECE Department, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University India Author

DOI:

https://doi.org/10.61841/27d8a661

Keywords:

Cloud, Security, Emergency, Heart rate, IoT

Abstract

For a patient with arrhythmia, a surveillance and warning device, particularly during the night of rest, can reduce the risk of death from heart attacks. A public pulse oximeter attached to the Internet of Things (IoT) system enables a family member to monitor a patient remotely. It is critical to provide an actual-time alert system capable of alert a patient when they are at danger. The unit uses a pulse oximeter module, a WLAN router to link the device to the cloud server, which is capable of displaying data on the Android display. Equipment for the patient is powered by a generator. Battery power is monitored, too. The heart rate's lowest reading accuracy was 96.9 per cent (normal, bradycardia and tachycardia) compared to the fingertip pulse oximeter's measured efficiency. Remote control data transmission speed depends on Internet access capacity.

Downloads

Download data is not yet available.

References

1. S. Takatani,and J. Ling, “Optical oximetry sensors for whole blood and tissue,”IEEE Eng. in Med. And Biol., vol. 13, no. 3, pp. 347, 1994.

2. Y. Mendelson,et al, “Design and evaluation of a new reflectance pulse oximeter sensor,”Medical Instrum., vol. 22, no. 4, pp. 167, 1988.

3. Kumar, Abhijeet et al., “Internet of Life (IOL),” 2015.

4. Brian Benchoff. “An SDK for the ESP8266 Wi-Fi chip,” Hackaday

5. "NodeMCU Devkit". Github. Node MCU Team. Retrieved 2 April 2015

6. Zeroday, “A lua based firmware for wifi-soc esp8266,” 2015.

7. Manan Mehta “ESP 8266: A Breakthrough In Wireless Sensor Networks And Internet Of Things”, pp. 07-11, 2015.

8. MAX 30100 Pulse oximeter Data Sheet

9. A. Pandey, and G. Prakash, “Deduplication with Attribute Based Encryption in E-Health Care Systems,”International Journal of MC Square Scientific Research, vol. 11, no. 4, pp.16-24, 2019.

10. S. A. Shahada,S. M. Hreiji, S. Shamsudheen,“IOT based garbage clearance alert system with gps location using arduino,”International Journal of MC Square Scientific Research, vol. 11, no. 1, pp. 1-8, 2019.

11. Azhari, A., Yoshimoto, S., Nezu, T., Iida, H., Ota, H., Noda, Y., Araki, T., Uemura, T., Sekitani, T. and Morii, K., “A patch-type wireless forehead pulse oximeter for SpO 2 measurement.,”In 2017 IEEE Biomedical Circuits and Systems Conference, pp. 1-4.

12. K. C. Chowdary, K. L. Krishna, K.L. Prasad,and K. Thejesh, “An Efficient Wireless Health Monitoring System,”In 2018 2nd International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud)(I-SMAC) I-SMAC (IoT in Social, Mobile, Analytics and Cloud)(I-SMAC), 2018 2nd International Conference, 2018.

13. L. Agustine, I. Muljono, P. R. Angka, A. Gunadhi, D. Lestariningsih, and W. A. Weliamto,“Heart rate monitoring device for arrhythmia using pulse oximeter sensor based on android,”International Conference on Computer Engineering, Network and Intelligent Multimedia, pp. 106-111.

14. C. S. Krishna, and N. Sampath, “December. Healthcare Monitoring System Based on IoT,”International Conference on Computational Systems and Information Technology for Sustainable Solution, pp. 1-5.

15. G. Bucci, F. Ciancetta, E. Fiorucci, A. Fioravanti, and A. Prudenzi, “A Pulse Oximetry IoT System Based on Powerline Technology,”Workshop on Metrology for Industry 4.0 and IoT, pp. 268-273.

Downloads

Published

31.10.2020

Issue

Vol. 24 No. 8 (2020): 24 (8) 2020

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Hema, L. K., Priya, R. M., Kumar Dwibedi, R., & Vijay, J. (2020). Smart pulse oximeter systems for spo2 measurement based on IOT. International Journal of Psychosocial Rehabilitation, 24(8), 10492-10498. https://doi.org/10.61841/27d8a661