INFLUENCE OF DIFFERENT METHODS OF COTTON PICKING ON THE QUALITY OF COTTON
DOI:
https://doi.org/10.61841/hcp2da55Keywords:
Cotton, machine harvesting, hand harvesting, moisture, dirt, knot, staple length, grade, method, spinningAbstract
This article provides information on moisture and impurities in cotton which picked by m hand and different cotton-picking machines, as well as the number of knots in the hand and machine-made cotton fiber, in addition to the length of the staple of the fiber. An analysis of the results of manual and machine research on cotton is represented. The moisture content, the contamination, the number of knots and the length of the staple depend on a number of factors and the results obtained by the methods of their determination are illustrated.The quality of cotton is determined not only by types of machines, but also by the climatic conditions during the harvest, cotton opening, field preparation and other factors, and the contamination by the State Standard UzDst 592 -2008 on the methods of determining the cotton contamination. The results of a practical study ofcomparing moisture and contamination of cotton harvested by hand and by cotton picking machine ''Case-2020'' in Genefon breeder type 1 in the Dustlik district of Jizzakh region of Uzbekistan and contrasting type cotton harvested by JohnDeere by SPD90 and humidity and humidity indicators of hand-picked cotton УСХ or ВХС-М-1, ЛКМ, and number of blanks and length of staples in cotton fiber МЧЖ Jizzakh textile The analysis of the results of the tests performed on the laboratory equipment on the USTER AFIS PRO 2 equipment installed in the laboratory of the divice is presented in table and graphical form. Based on the results of the research, it is stated that it is necessary to develop recommendations on technological processes of cotton processing and spinning based on the analysis of moisture content, contamination, number of sticks and staple lengths of cotton.
Downloads
References
1. The resolution of the Cabinet of Ministers of the Republic of Uzbekistan from November 25, 2018 of No. 53 "About measures for introduction of modern forms of organization of the textile manufacture".
2. Adoption of development programs up to 2025 based on a briefing with the leadership of “Uzagrotechsanoat” JSC on August 28, 2019.
3. J Q Jumaniyazov, IZ Abbazov, FO Egamberdiev. Explore the effect of spinning cotton picking // Proceedings of the Republican scientific-technical conference "Innovative solutions for deep processing of textile threads". Namangan 2019. —B.61-62
4. KJJumaniyazov, JB Mirzaboev, B.Mirzaboev Properties of fiber waste and possibilities of their efficient use // Namangan Journal of Engineering and Technology Institute ISSN: 2181-8622 TOM 4-2, 36-41 p
5. Khojiev MT; Abbazov, IZ; and Alimov, O.N. (2019) Ways of Cotton Cotton Cleaning, "Made in Cotton Factory," Textile of Uzbekistan: Vol.1: No. 1, Art. Eliktron: https://uzjournals.edu.uz/titli/vol1/iss1/2
6. M.Xodjiev, I.Abbazov, O.Alimov, R.Karimova The Composition of Releasing Passion of Dusty in the Process of Pat // International Journal of Engineering and Advanced Technology ISSN: 2249-8958 Volume-8, Issur-3S (2019) —pp. 279-283.
7. M.Xodjiev, I.Abbazov, O.Alimov, J.Karimov Fraction Structure of Cotton Cleaning Equipment in Cotton Enterprises and Their Cleaning Effectiveness // International Journal of Advanced Research in Science, Engineering and Technology ISSN: 2350-0328 Vol.6 Issue 1 (2019) —pp. 7983-7988.
8. M.Xodjiev, I.Abbazov, B.Mardonov, O.Sarimsakov Effective Cleaning of Cotton Waste Produced at Cotton Cleaning Factories // American Association for Science and Technology ISSN: 2375-3803. Volume-5, Issur-2 (2017) —pp. 22-28.
9. Ruixiu Sui, J.Alex Thomasson. Effect of machine-fiber interaction on cotton fiber quality and foreign-matter particle attachment to fiber// Journal of Cotton Science 14:145—153. 2010.
10. I.Abbazov, O.Sarimsakov, M.Khodjiev, B.Mardonov Effective Cleaning of Cotton Waste Produced at Cotton Cleaning Factories // American Journal ASCIT Communications 5, 22-28
11. A.P. Parpiev, M.A. Akhmatov, AK Usmankulov, M. Muminov. Drying of raw cotton. Textbook. - T .: Chulpon, 2009.
12. Parpiev A., M. Shorakhmedova and others. Some problems of fiber quality improvement // The role of innovations in the improvement of techniques and technologies of cotton cleaning, textile and light industry. Namangan 2015. —B. 40-45
13. Coordinated Cotton Technology Technology (PDIZO 2012) Association "Uzpakhtasanoat", JSC "Cotton Research Center", Tashkent-2012.
14. K.J.Jumaniyazov , SulaymonovR.Sh., KamalovSh.Z., AsadovaI.G., LugachevA.E., AminovH.H. Improvement of linter cleaning technology // Collection of results of scientific and technical achievements in the cotton sphere of the republic of Uzbekistan (UZPSIM-90) [text]: Collection of articles of the international scientific and technical conference, october 23 - 27, 2017. - T .: "Ilmiytexnikaaxboroti-press nashriyoti", p 126-130.
15. K.Jumaniyazov, B.M. Mardonov, R.Sh., Suleymanov, N.Z. Kamalov. Modeling process controls for linta zone zone pilot pilot cylinder and grebenkoy.// Conference on Innovation 2017, Innovation 2017, Tashkent, TUIT, 26-27 October, 2017. - p. 231—232.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
