Analysis Of Rotor Cutter Damage On Semi Dull Textile Chips
DOI:
https://doi.org/10.61841/ypwnm146Keywords:
cutting tools, hardness test, composition testAbstract
In general, a cutter machine is a cutting tool for cutting large filaments in making chips / plastic pellets. This power motor is capable of moving cutter blades up to 220 rpm, blades designed like starfruit can be used to cut 44 to 66 filament streams. This knife is installed by dealing with a bad knife so that the cutting is more perfect, this often suffers damage to the blade and bad knife, namely the presence of defects or cracks. In addition, this will also make the industry suffer losses in terms of raw materials and blades. To prevent damage from continuing to occur, it is necessary to examine the cause of damage to the cutting blade by conducting tests: hardness test, metallographic test, chemical composition test
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
