ANALISIS KUALITAS PRODUK PACKAGING PLASTIK DENGAN PENDEKATAN METODE POKA YOKE

Authors

  • Achmad Faizal Jurusan Teknik Industri Universitas Widyatama Jalan Cikutra No.204A, Bandung Author

DOI:

https://doi.org/10.61841/vqrj7a46

Keywords:

Quality, Zero Defect, Pareto Diagram, Fishbone Diagram, Poka Yoke

Abstract

 B69.PRINT is a small micro-enterprises (MSMES) that manufactures various types of packaging, the company realized to compete in business competition then business actors must improve the quality of their products and services to maintain the trust of the consumers. The company currently has problems in its product results, which is still a product that does not meet the quality standards, so that it can affect consumer interest and the marketing process so disturbed. This research is done to reduce the errors that underlie waste and can provide solutions to effective and efficient problems.

 

The problem now faced by the company is the quality of the product, it is seen from several products defect to exceed the determination of the tolerance limit of 1.5%. Quality is the main factor that needs to be noticed in B69. Print, therefore, required a tool or method to suppress the number of defects of the product to Zero Defect. The tools or research methods that are done in case studies are using Pareto Diagram, Fishbone Diagram, and Poka Yoke method to define the mistakes caused by Human Error and can provide proposals for improvement.

Based on research that has been conducted known defect priorities using Pareto Diagram is located on the type of Screen-Printing Defect (A) with an average percentage throughout the year 2019 of 1.91% which occurs due to overproduction over the capacity of B69 production capability. Print each month reaches 13,104 Pcs. Fishbone Diagram shows the magnitude of demand often lowers the focus of workers due to rush chasing deadline without regard to product quality. The results of Poka Yoke analysis also shows there is still "step process not done" with the highest score of 8 points, then the author team proposed three types of improvements started from the Warning function as a tool to ensure, Control tools to show the order of work, and Shut Down to show the time of the worker process. 

Downloads

Download data is not yet available.

References

[1] Assauri, Sofjan. (2016). Manajemen Operasi Produksi. Jakarta: PT .Raja Grafido Persada.

[2] Burlikowska, M. D. & D. Szewieczek. (2009). The Poka-Yoke Method as An Improving Quality Tool of

Operations in The Process. Journal of Achievement in Materials and Manufacturing Engineering, Vol.36:95-102.

[3] Ariani. (2004) Pengertian Diagram Poreto. https://www.coursehero.com/file/p4itkbn/Menurut-Assauri-1993- diagram-pareto-merupakan-suatu-gambaran-yang-mengurutkan/, 15 April 2020

[4] Dudek-Burlikowska, M & Szewieczek, D. (2009). The Poka-Yoke Method as an Improving Quality Tool of Operations in The Process. Journal of Achievements in Materials and Manufacturing Engineering, 36(1), 95-102.

[5] Gaspersz, Vincent. (2001). Metode Analisis Untuk Peningkatan Kualitas. Penerbit: PT Gramedia Pustaka Utama, Jakarta.

[6] Rudjito, (2005). Pengertian UMKM. https://www.coursehero.com/file/p5b591qp/Menurut-Rudjito-pengertianUMKM-adalah-usaha-yang-punya-peranan-penting-dalam/, 17 April 2020.

[7] Haming, Murdifin dan Mahfud Nurnajamuddin. (2014). Manajemen Produksi Modern, Operasi Manufaktur dan

Jasa. Jakarta: Bumi Aksara.

[8] Heizer, Jay & Barry Rander. (2015). Manajemen Operasi: Manajemen Keberlangsungan dan Rantai Pasokan (Edisi 11). Jakarta: Salemba Empat.

[9] Jiwa. (2009). Pengertian Product Liability. http://jenggoten.blogspot.com/2009/10/pengertian-productliability.html, 5 Maret 2020.

[10] Nasution. (2010). Pengertian Diagram Pareto. http://eprints.umg.ac.id/136/2/BAB%20II.pdf, 17 April 2020.

[11] Zulian, Yamit. (2013). Manajemen Kualitas Produk & Jasa. Yogyakarta: Ekonisia.

[12] Zimmerer, T. W., & Scarborough, N. M. (2002). Pengantar Kewirausahaan dan Manajemen Bisnis Kecil. Jakarta: Prenhallindo.

[13] Putri, D. R. & Handayani, W. (2019). Zero Defect Pada Produksi Kantong Kraft Melalui Metode Poka Yoke Di Pt. Industri Kemasan Semen Gresik. Jurnal MEBIS (Manajemen dan Bisnis) - Vol. 4, No. 1, Juli 2019, pp. 44-58.

[14] Jabarullah, N.H. (2019) Production of olefins from syngas over Al2O3 supported Ni and Cu nano-catalysts, Petroleum Science and Technology, 37 (4), 382 – 385.

[15] Dave, Yash. (2015). Implementation of poka yokeTechnique in a gear industry. A case Study International Journal of Latest Research in Science and Technology ISSN (Online): 2278-5299. Volume 4, Issue 3: Page No.32-33.

[16] Pratik D, et All, (2015), Poka Yoke Implimentation On Punching Machine: A Case Study, Volume: 04 Issue: 02 | Feb-2015, http://www.ijret.org, Department of Mechanical Engineering, KIT’s College of Engineering, Kolhapur, Maharashtra, India.

[17] Kholik, Heri M. (2008). Aplikasi DMAIC Dalam Metode Six Sigma dan Eksperimen Shainin Bhote sebagai Penurunan Persentase Cacat. Jurnal Teknik. Industri, Vol. 9, No. 2, Agustus 2008: 117-127, Mercubuana, http://qualityengineering.wordpress.com/tag/design-of-experiment.

[18] Salam, Abdul. (2008). Cacat Tersembunyi (Latent -Defect), 5 November 2011.

[19] Windarti, Tantri. (2014), Pengendalian kualitas untuk meminimasi produk cacat pada proses produksi besi beton, jurnal teknik industri, Program Studi Teknik Industri, Fakultas Teknik-Universitas Diponegoro Tembalang Semarang.

[20] Kumar, Rajan et al,. (2016). Poka-Yoke Technique, Methodology, & Design. Indian Journal of Engineering, 13(33), 362-370.

Downloads

Published

29.02.2020

How to Cite

Faizal, A. . (2020). ANALISIS KUALITAS PRODUK PACKAGING PLASTIK DENGAN PENDEKATAN METODE POKA YOKE. International Journal of Psychosocial Rehabilitation, 24(1), 4799-4814. https://doi.org/10.61841/vqrj7a46