OPTIMIZATION OF TURBULIZATOR SPRAYER PARAMETERS BY MATHEMATICAL PLANNING METHOD OF EXPERIMENTS

Authors

  • Khusniddin Irisov Doniyorovich Tashkent, Uzbekistan, Contact information Author
  • Ivadulla Ashirbekov Ashirbekovich Tashkent State Agrarian University, Author
  • Sobir Sherqobilov Mengqobilovich Tashkent State Technical University, Tashkent, Author
  • Fayzulla Begimkulov Ergashovich Doctor of Philosophy, Associate Professor, Department of Agricultural Mechanization, Engineering Faculty, Karshi Engineering and Economics Institute, Karshi, Uzbekistan ,Contact information (tel.; e-mail): +998919557520 Author

DOI:

https://doi.org/10.61841/85w0nw50

Keywords:

cluster, defoliation, working fluid, spray, sprayer, droplet, high dispersion droplets,, factors, parameters, regression equation,, optimization, number of droplets, density of droplets, median-mass diameter, DepositScan program, analysis, results, cost-effectiveness

Abstract

The article highlights the tasks of the stable advancement of diversified and cluster farms in the Republic of Uzbekistan, existing problems in the cultivation of agricultural crops that are planned to be resolved in recent years, in addition to the development of high-quality crops, it has been acknowledged particularly that one of the major potential problems is to improve the technological efficiency and technical- economic performance of chemical defoliation agents, particularly in cotton. In this research, improving the technical efficiency of liquid chemicals (defoliants) used in the process of cotton defoliation, analysis of technologies and technical means developed by the world’s leading scientists in this field, although the defoliation process is one of the important factors in improving cotton yield and fiber quality, the working hypothesis by the authors on the formation of highly dispersed droplets has not yet been sufficiently developed in this area, scope, essence, design scheme, technological process of operation of the proposed promising vortex- turbilizator, the theoretical aspects of the formation of high-dispersion droplets, methods, individual dimensions of droplets per 1 cm2 of the object of study, their distribution, total number of drops, drop density scanner, computer and a multi-factor regression equation representing the detection process in a specially designed software system called "DepositScan" and the process of generating the highly dispersed droplets proposed using a multifactor experiment, optimal values of the main factors of the turbilizator, according to which the working fluid pressure to the reduction of the median-mass diameters of the formed droplets, the annual technical and economic efficiency of the experimental spraying unit equipped with a new sprayer are determined by the fact that the width of the annular holes in the sprayers has a greater impact on the increase in working fluid consumption.

Downloads

Download data is not yet available.

References

1. Mirziyoev Sh.M. Together we will build a free and prosperous democratic in Uzbekistan. Tashkent: Uzbekistan, 2016. 56(-15) p. (in Uzbek)

2. Stelmakh, V.N. Justification of the operation process and parameters of the pneumatic-mechanical sprayers of the boom sprayer / Authors' abstract. -Glevaha. 1992. -16 p. (in Ukraine)

3. Markevich, A.E. Modeling of the treatment surface coating by a polydisperse pesticide aerosol [Electron resource] /. - Access mode to the article: remkom.by'content/view/96/lang.ru/. (in Ukraine))

4. Khafizov F.S., Afanasenko V.G., Boyev E.V. Development of the design of the liquid dispersion device and methods for calculation of its main parameters. Journal: "Mechanical Engineering and Engineering Education". Issue 3, -M.: MPU, 2008. –Pp. 48-54 (in Russian).

5. Palapin, A.V. Optimization of the parameters and operation modes of the ultra-low volume fan sprayer / Authors' abstract. Krasnodar. 2005. -22 p (in Russian).

6. Ismatov, A.N. Evolution of the finely dispersed droplets at the explosive atomization of the liquids - Biysk. 2011. -22 p (in Russian).

7. Mireia Altimira, Alejandro Rivas, Gorka S. Larraona, Raul Anton, Juan Carlos Ramos. Characterization

of fan spray atomizers through numerical simulation. International Journal of Heat and Fluid Flow. Volume 30, Issue 2, April 2009. -Pp. 339-355. DOI: 10.1016/j.ijheatfluidflow.2008.12.006 (in Spain).

8. Gary J.Dorr, Andrew J.Hewitt, Steve W.Adkins, Jim Hanan, Huichun Zhang, Barry Noller. A comparison of initial spray characteristics produced by agricultural nozzles. CropProtection, Volume 53, November 2013. -Pp. 109-117. (in Australia)

9. Utepov, B.B. Justification of the basic parameters and operation modes of the pneumatic-disk sprayer of the low-volume cotton sprayer / Dissertation. -Yangiyul. 1993. -183 p (in Russian).

10. Yusupov, B.Yu. Justification of the main parameters of the m modes of operation of the monodisperse perforated-drum atomizer for the low-volume spraying of the cotton / Autoreferat. -Yangiyul. 1998 (in Uzbek).

11. Salimov A.U. and others. Questions of the theory of electrostatic atomization, -Tashkent: Fan, 1968. -64 p, -19 p (in Uzbek).

12. Volynskiy M.S. The extraordinary life of an ordinary drop. Moscow, 1986. Pp. 32-71. (in Russian)

13. Vitman, L.A.; Katznelson, B.D.; Paleyev, I.I. Liquid atomization by the nozzles // Under edition of S.S. Kutateladze. -M.: State energy publishing house. 1962. –258 p (in Russian).

14. Latipov Q.Sh. Hydraulics, hydraulic machines, hydrodrives. - Tashkent: Ukituvchi. 1992. – Pp.102-121 (in Uzbek).

15. T.M. Bashta, S.S. Rudnev, B.B. Nekrasov, etc. Hydraulics, hydraulic machines and hydrodrives. Uchebnechnek. -M.: Alliance, 2010. -423 p (in Russian).

16. Patent RUz № IAP 04168. Raspylitel` [Spray]. Kimsanboev Kh.Kh., Ashirbekov I.A., Irisov Kh.D. Tashkent, 06/30/2010, Bul., No 6. (in Uzbek)

17. Useful model. FAP 01451. Ashirbekov I.A., Irisov X.D., Ibragimov F.F., Khojaev J.I. Working fluid decomposition device. –Tashkent, 31.01.2020. Byul., №1. (in Uzbek)

18. Ashirbekov I.A., Irisov Kh.D. Research results of a spraying unit equipped with a vortex-turbulization action spray. Scientific-practical journal “Irrigation and Melioration” –Tashkent: 3 (13) issues, 2018. – Pp. 57-60. (in Uzbek)

19. Ashirbekov I.A., Irisov Kh.D. Theoretical aspects of the process of monodisperse droplets formation in the perforated turbulator zone. "Bulletin of Science and Practice" Scientific Journal (Journal is Ulrich's Periodicals Directory) Impact-factor: RINTs - 0,309, - Russia: 2018, Volume 4, Issue 12, –Pp 338-348 (in Uzbek).

20. Irisov Kh.D. The results of the study of an experimental spraying unit equipped with a vortex- turbilizator sprayer. // “Irrigation and Melioration” -Tashkent, 2019. -Pp 35-40 (in Uzbek)

21. Heping Zhua, Masoud Salyani, Robert D. Fox. A portable scanning system for evaluation of spray deposit distribution. Journal of Computers and Electronics in Agriculture 76 (2011) 38–43. (in USA)

22. Salyani, M., Fox, R.D., 1999. Evaluation of spray quality by oil and water-sensitive papers. Trans. ASAE 42 (1), 37–43. (in Colombia).

23. Sesquile, Juan David, & Castillo, Bernardo. (2016). Assessment of pesticide application quality with a manual sprayer in spinach. Agronomía Colombiana, 34(3), 346-354.

https://dx.doi.org/10.15446/agron.colomb.v34n3.54453 (in Colombia)

24. http://www.ars.usda.gov/mwa/wooster/atru/depositscan

25. Test method for agricultural machinery (Sprayers and pollinators). O'zDst (GOST) 3202:2017. UzASM

and C, -Tashkent, 2017. –53 p (in Russian).

26. Tests of agricultural machinery. Methods of energy assessment of machines. Tst 63.03.2001// Official publication. -Tashkent, 2001.-59 p (in Russian).

27. Tests of agricultural machinery. Methods of calculation of economic efficiency of tested agricultural machinery. RD Uz 63.03-98 // Official edition. - Tashkent, 1998.-49 p (in Russian).

28. Armour B.A. Methodology of the field experience. -M.: Kolos, 1978.-335 p (in Russian).

29. Melnikov, S.V.; Alyoshkin, V.Ya.; Roshchin, P.M. Planning of an experiment in research of agricultural processes. 1980. –166 p (in Russian).

30. Augambayev M., Ivanov A.Z., Terekhov Y.I. Fundamentals of planning a research experiment. - Tashkent: Ukituvchi, 1993. – 336 p (in Russian).

Downloads

Published

30.06.2020

Issue

Vol. 24 No. 6 (2020): 24 (6) 2020

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Doniyorovich, K. I., Ashirbekovich, I. A., Mengqobilovich, S. S., & Ergashovich, F. B. . (2020). OPTIMIZATION OF TURBULIZATOR SPRAYER PARAMETERS BY MATHEMATICAL PLANNING METHOD OF EXPERIMENTS. International Journal of Psychosocial Rehabilitation, 24(6), 9183-9198. https://doi.org/10.61841/85w0nw50