The Effectiveness of Manufacturing Device in Production Industries
DOI:
https://doi.org/10.61841/bd8vm082Keywords:
Device performance,, diesel plant,, productivity & empirical.Abstract
In current serious worldwide commercial center the entirety of the associations is particularly concentrating on improving their profitability in order to save and furthermore development the serious increase. Therefore, appraisal of efficiency in any organization is significant. This work makes a strength of investigating the effect of human, capital and staple contribution at the efficiency of a diesel power station. This investigation controlled inside the venture features the critical thought processes in varieties inside the productiveness of a Diesel plant. The exact strategy received close by side relapse strategies affirmed that standard Gadget proficiency nearby staple accessibility is that the rule component for the changes inside the yield acquired from the plant.
Downloads
References
1. Ahuja, I. P. S., and J. S. Khamba. 2006. “Strategies and Success Factors for Overcoming Challenges in TPM Implementation in Indian Manufacturing Industry.” Journal of Quality in Maintenance Engineering 14 (2): 123–147.
2. Brah, S. A., and W. K. Chong. 2005. “Relationship between Total Productive Maintenance and Performance.” International Journal of Production Research 42 (12): 2383–2401.
3. R. Greatbanks. 2000. “Overall Equipment Effectiveness as a Measure of Operational Improvements-a Practical Analysis.” International Journal of Operations Management 20: 1488–1502.
4. Campbell, J. D., and R. P. James. 2006. Strategies for Excellence in Maintenance Management. 2nd ed. Portland, OR: Productivity press.
5. J. E. Rooda. 2006. “OEE and Equipment Effectiveness: An Evaluation.” International Journal of Production Research 44 (23): 4987–5003.
6. J. S. Dureja. 2010. “TPM- a Key Strategy for Productivity Improvement in Process Industry.” Journal of Engineering Science and Technology 6 (1): 1–16.
7. T. Griffin. 1997. “Maintenance: Modeling its Strategic Impact.” Journal of Managerial Issues 9: 440–453.
8. R. Korukonda, I. Virtanen, and P. Yli-Olli. 1994. “Improving Productivity and Quality in Manufacturing Organizations.” International Journal of Production Economics 36: 169–183.
9. S. Vardhan, and M. S. Al Haque. 2016. “Study of Success Factors of TPM Implementation in Indian Industry towards Operational Excellence: An Overview.
10. Cao, Y., Huang, L., Li. Y., Jermsittiparsert, K., Ahmadi-Nezamabad, H., & Nojavan, S. 2020. “Optimal Scheduling of Electric Vehicles Aggregator under Market Price Uncertainty Using Robust Optimization Technique.” International Journal of Electrical Power & Energy Systems 117: 105628.
11. Yu, D., Wang, Y., Liu, H., Jermsittiparsert, K., & Razmjooy, N. 2019. “System Identification of PEM Fuel Cells Using an Improved Elman Neural Network and a New Hybrid Optimization Algorithm.” Energy Reports 5: 1365-1374.
12. Tian, M., Ebadi, A., Jermsittiparsert, K., Kadyrov, M., Ponomarev, A., Javanshir, N., & Nojavan, S. 2019. “Risk-Based Stochastic Scheduling of Energy Hub System in the Presence of Heating Network and Thermal Energy Management.” Applied Thermal Engineering 159: 113825.
13. Yu, D., Wnag, J., Li, D., Jermsittiparsert, K., & Nojavan, S. 2019. “Risk-Averse Stochastic Operation of a Power System Integrated with Hydrogen Storage System and Wind Generation in the Presence of Demand Response Program.” International Journal of Hydrogen Energy (In press), DOI: 10.1016/j.ijhydene.2019.09.222.
14. Jabarullah, N., Jermsittiparsert, K., Melnikov, P., Maseleno, A., Hosseinian, A., & Vessally, E. 2019. “Methods for the Direct Synthesis of Thioesters from Aldehydes: A Focus Review.” Journal of Sulfur Chemistry (In press), DOI: 10.1080/17415993.2019.1658764.
15. Jiao, Y., Jermsittiparsert, K., Krasnopevtsev, A., Yousif, Q., & Salmani, M. 2019. “Interaction of Thermal Cycling and Electric Current on Reliability of Solder Joints in Different Solder Balls.” Materials Research Express 6 (10): 106302.
16. Yu, D., Ebadi, A., Jermsittiparsert, K., Jabarullah, N., Vasiljeva, M., & Nojavan, S. 2019. “Risk- constrained Stochastic Optimization of a Concentrating Solar Power Plant.” IEEE Transactions on Sustainable Energy (In press), DOI: 10.1109/TSTE.2019.2927735.
17. Jermsittiparsert, K., Sriyakul, T., Sutduean, J., & Singsa, A. 2019. “Determinants of Supply Chain Employees Safety Behaviours.” Journal of Computational and Theoretical Nanoscience 16 (7): 2959- 2966.
18. Sriyakul, T., Singsa, A., Sutduean, J., & Jermsittiparsert, K. 2019. “Effect of Cultural Traits, Leadership Styles and Commitment to Change on Supply Chain Operational Excellence.” Journal of Computational and Theoretical Nanoscience 16 (7): 2967-2974.
19. Sutduean, J., Singsa, A., Sriyakul, T., & Jermsittiparsert, K. 2019. “Supply Chain Integration, Enterprise Resource Planning, and Organizational Performance: The Enterprise Resource Planning Implementation Approach.” Journal of Computational and Theoretical Nanoscience 16 (7): 2975-2981.
20. Singsa, A., Sriyakul, T., Sutduean, J., & Jermsittiparsert, K. 2019. “Willingness of Supply Chain Employees to Support Disability Management at Workplace: A Case of Indonesian Supply Chain Companies.” Journal of Computational and Theoretical Nanoscience 16 (7): 2982-2989.
21. Jermsittiparsert, K. & Chankoson, T. 2019. “Behavior of Tourism Industry under the Situation of Environmental Threats and Carbon Emission: Time Series Analysis from Thailand.” International Journal of Energy Economics and Policy 9 (6): 366-372.
22. Romprasert, S. & Jermsittiparsert, K. 2019. “Energy Risk Management and Cost of Economic Production Biodiesel Project.” International Journal of Energy Economics and Policy 9 (6): 349-357.
23. Kasayanond, A., Umam, R., & Jermsittiparsert, K. 2019. “Environmental Sustainability and its Growth in Malaysia by Elaborating the Green Economy and Environmental Efficiency.” International Journal of Energy Economics and Policy 9 (5): 465-473.
24. Jermsittiparsert, K, Sriyakul, T., & Rodoonsong, S. 2013. “Power(lessness) of the State in the Globalization Era: Empirical Proposals on Determination of Domestic Paddy Price in Thailand.” Asian Social Science 9 (17): 218-225.
25. Jermsittiparsert, K, Sriyakul, T., & Pamornmast, C. 2014. “Minimum Wage and Country’s Economic Competitiveness: An Empirical Discourse Analysis.” The Social Sciences 9 (4): 244-250.
26. Jermsittiparsert, K., Pamornmast, C., & Sriyakul, T. 2014. “An Empirical Discourse Analysis on Correlations between Exchange Rate and Industrial Product Export.” International Business Management 8 (5): 295-300.
27. Jermsittiparsert, K., Sriyakul, T., Pamornmast, C., Rodboonsong, S., Boonprong, W., Sangperm, N., Pakvichai, V., Vipaporn, T., & Maneechote, K. 2016. “A Comparative Study of the Administration of Primary Education between the Provincial Administration Organisation and the Office of the Basic Education Commission in Thailand.” The Social Sciences 11 (21): 5104-5110.
28. Jermsittiparsert, K., Trimek, J., & Vivatthanaporn, A. 2015. “Fear of Crime among People in Muang-Ake, Lak-Hok, Muang, Pathumthani.” The Social Sciences 10 (1): 24-30.
29. Jermsittiparsert, K. & Akahat, N. 2016. “Fear of Crime among Students of Kalasin Rajabhat University.” Research Journal of Applied Sciences 11 (2): 54-61.
30. P. V. Ramaiah (2016). Application of Taguchi, Fuzzy-Grey Relational Analysis for Process Parameters Optimization of WEDM on Inconel-825. Indian Journal of Science and Technology, vol. 8, no. 35.
31. N and Dalgarnob. K. W. (2014). Effect of wire EDM cutting parameters for evaluating of Additive Manufacturing Hybrid Metal Material. Proc. of 2nd International Materials, Industrial, and Manufacturing Engineering Conference, 4-6, Indonesia, pp. 532 – 537.
32. Arunkumar. L, Raghunath. B. K. Electro Discharge Machining Characteristics of Mg/SiCPMetal matrix Composites by Powder Metallurgy Techniques. International Journal of Engineering and Technology.
33. Kanlayasiri. K, Boonmung. S (2006). Effects of wire - EDM machining variables on surface roughness of newly developed DC 53 die steel: Design of experiments and regression model. Journal of Materials Processing Technology, 192–193, pp. 459– 464.
34. B. Puri, B. Bhattacharyya (2004). An analysis and optimization of the geometrical inaccuracy due to wire lag phenomenon in WEDM,” International Journal of Machine Tools & Manufacture, vol. 43, 2003, pp. 151–159.
35. Dr. G. Krishnaiah (2016). Optimization of process parameters using AHP and VIKOR when turning aisi 1040 steel with coated tools. International Journal of Mechanical Engineering and Technology, vol. 8, Iss. 1, pp. 241–248.
36. P. Shandilya, P. K. Jain, N. K. Jain (2011). Wire electric discharge of metal matrix composite. Damm International scientific book, pp. 383-400.
37. Saravanakumar, A., Santarao, K., & Nandini, G. Influence of alumina nano powder mixed dielectric fluid in electric spark machining of aisi d3 steel. Carbon (c), 2, 2–3.
38. R. K. Bhuyan, and B. C. Routara (2016). Optimization the machining parameters by using VIKOR and Entropy Weight method during EDM process of Al–18%SiCp Metal matrix composite. Decision Science Letters, vol. 5, pp. 269–282.
39. Bhattacharyya, B. (2014). Analysis of traveling wire electrochemical discharge machining of Hylam based composites by Taguchi method. International Journal of Research in Engineering & Technology, 2(2), 223–236.
40. S. C. Raja, and G. Sundararaja. 2013. “Improving Productivity of Manufacturing Division using Lean Concepts and Development of Material Gravity Feeder-a Case Study.” International Journal of Lean Thinking 3 (2): 117–134.
41. R. R. Bodhale, and D. E. Robinson. 2005. “Manufacturing Productivity Improvement using Effectiveness Metrics and Simulation Analysis.” International Journal of Production Research 41 (3): 513–527.
42. Maggard, B. N., and D. Rhyne. 1993. “TPM- a Timely Integration of Production and Maintenance.” Production and Inventory Management 33: 6–10.
43. Mcadam, R., and A. M. Duffner. 1997. “Implementation of Total Productive Maintenance in Support of an Established Total Quality Programme.” Total Quality Management 7 (6): 613–630. Doi: 10.1080/09544129610522.
44. McKone, K. E., G. S. Roger, and O. C. Kristy. 1998. “Total Productive Maintenance: A Contextual View.” Journal of Operations Management 17 (2): 123–144.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
