A REVIEW OF DESTRUCTIVE AND NON DESTRUCTIVE TESTING OF ALUMINUM AND ALUMINUM ALLOY PLATE OF TIG WELDING METHODS
DOI:
https://doi.org/10.61841/z4hwx503Keywords:
TIG, Aluminum, welding, Destructive testingAbstract
This paper reviews and deals with the welded quality of aluminum and aluminum alloy plates by the TIG welding method. The TIG welding method is one of the most used and popular methods to weld aluminum. Aluminum has unique properties: ductile, non-magnetic, light weight, weldability, and also has corrosion resistance in nature. Input parameters were varied according to the experimental design. The accuracy and quality of welded joints largely depend upon the type of inert gas, welding speed, and type of power supply. The mechanical properties of weld joints also vary based on the parameters. The mechanical properties of YS and UTS vary by pulsed and non-pulsed current at different frequencies. It has wide application in industry fields, namely marine, aircraft, heat exchangers, automobiles, oil refineries, etc.
Downloads
References
1. International Journal of Advanced Engineering Technology E-ISSN 0976-3945 IJAET/Vol.I/Issue II/July-Sept.,2010/200-211 Research Article EXPERIMENTAL INVESTIGATIONS ON PULSED TIG Welding of Aluminum Plate by Sanjeev Kumar.
2. IJIRST—International Journal for Innovative Research in Science & Technology| Volume 4/Issue 2/July 2017 ISSN (online): 2349-6010 All rights reserved by www.ijirst.org 137 Experimental Investigation of Various Welding Parameters on TIG Welding of Aluminum Alloy-2014 by Pankaj Sharma.
3. Volume I, Issue III, August 2014 || IJRSI ISSN 2321 - 2705 www.rsisinternational.org/IJRSI.html Page
1 Optimization of Tungsten Inert Gas Welding on 6063 Aluminum Alloy on Taguchi Method by K. M. Eazhil.
4. International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13 || Number 12 (2018) pp. 10658-10663 © Research India Publications. http://www.ripublication.com 10658 Study of Effect of Process Parameters of Welding during TIG welding of AA 7075 and its optimization by Harmish Bhatt.
5. International Journal of Advance Research in Science and Engineering ISSN 2319-8354 Volume No.7 ||
Issue No.06 || June 2018 http://www.ijarse.com Experimental Processes of Welding and Planning of TIG
Welding of Aluminum Plate by Prashant.
6. IPASJ International Journal of Mechanical Engineering (IIJME) Web Site:
http://www.ipasj.org/IIJME/IIJME.htm A Publisher for Research Motivation Email:[email protected]
Volume 4, Issue 9, September 2016 ISSN 2321-6441 Optimisation of influence of Tig Welding parameters
on mechanical properties of aluminum 6061 alloy by A Review Rajan Verma.
7. ISSN: 2277-9655 [Singh* et al., 5(11): November, 2016] Impact Factor: 4.116 IC™ Value: 3.00 CODEN:
IJESS7 IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH
TECHNOLOGY EXPERIMENTAL INVESTIGATION OF TENSILE STRENGTH OF AA 6082
USING TIG WELDING AT DIFFERENT PROCESS PARAMETERS by Surjeet Singh
8. International Journal for Research in Engineering Application & Management (IJREAM) ISSN : 2454-
9150 Special Issue - TMRI - 2019 88 | TMRI2019019 DOI : 10.18231/2454-9150.2019.0550 © 2019,
IJREAM All Rights Reserved. A Review on - Investigation & Optimization of Tig Welding Parameters
And Their Effect on Aluminum Plate (AL 5052) by LOKESH KUMAR SHARMA.
9. International Journal for Research in Engineering Application & Management (IJREAM) ISSN : 2454-
9150 Special Issue - TMRI - 2019 88 | TMRI2019019 DOI : 10.18231/2454-9150.2019.0550 © 2019,
IJREAM All Rights Reserved. A Review on - Investigation & Optimization of Tig Welding Parameters
And Their Effect on Aluminum Plate (AL 5052) by LOKESH KUMAR SHARMA.
10. INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL Volume 1 ||
No 3 || 2010 © Copyright 2010 All rights reserved Integrated Publishing Association RESEARCH
ARTICLE ISSN 09764259 518 Influence of Welding Speed on Tensile Strength of Welded Joint in TIG
Welding Process by Ahmed Khalid Hussain.
11. Vol-2 Issue-6 2016 IJARIIE-ISSN(O)-2395-4396 3511 www.ijariie.com 1196 TENSILE STRENGTH
ANALYSIS OF V GROOVE BUTT WELD JOINT FOR ALUMINIUM ALLOYS AA 2025 & AA 7025
by a Professor N.B.Landge.
12. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684, p-ISSN: 2320–
334X Special Issue - AETM'16 54 | Page Influences of TIG welding parameters on tensile and impact
behaviour of aluminium alloy joints: A Review by Yashwant Thakur.
13. International Journal of Pure and Applied Mathematics Volume 119 No. 12 2018, 15709-15715 ISSN:
1314-3395 Special Issue Mechanical Behaviour of Aluminium Plate Joints Using TIG Welding by Katta
Ranadeep Reddy.
14. The International Journal of Engineering And Science (IJES) ||Volume|| 1 ||Issue|| 1 ||Pages|| 01-05 || Nov
2012 || ISSN: 2319–1813 ISBN: 2319–1805 www.theijes.com THE IJES Page 1 Effect of Pulsed Current
Tig Welding Parameters on Mechanical Properties of J-Joint Strength of Aa6351 by Indira Rani.
15. Revista Facultad de Ingeniería Print version ISSN 0121-1129 Rev. Fac. ing. vol.25 no.43 Tunja Sep./Dec.
2016 Microstructure and mechanical properties of GTAW welded joints of AA6105 aluminum alloy
Minerva Dorta-Almenara.
16. International Journal of Trend in Scientific Research and Development (IJTSRD) Volume: 3 | Issue: 3 |Mar-Apr 2019 Available Online: www.ijtsrd.com e-ISSN: 2456 - 6470 @ IJTSRD | Unique Paper ID –IJTSRD23238 | Volume – 3 | Issue – 3 | Mar-Apr 2019 Page: 1047 Experimental Investigation on TIG
Welded Aluminium Alloy-6082 Weldment using Non-Destructive Evaluation by I. S. N. V. R Prashanth.
17. World Academy of Science, Engineering and Technology International Journal of Mechanical, Industrial
Science and Engineering Vol:7 No:11, 2013 An Evaluation of TIG Welding Parametric Influence on
Tensile Strength of 5083 Aluminium Alloy by Lakshman Singh.
18. AIJREAS VOLUME 1, ISSUE 9 (2016, SEPT) (ISSN-2455-6300) ONLINE ANVESHANA’S
INTERNATIONAL JOURNAL OF RESEARCH IN ENGINEERING AND APPLIED SCIENCES
ANVESHANA’S INTERNATIONAL JOURNAL OF RESEARCH IN ENGINEERING AND APPLIED
SCIENCES 82 VARIOUS EFFECTS OF WELDING PARAMETERS ON TIG WELDING OF 2024-T3
CLAD ALUMINUM ALLOY PLATE by M. RAJKIRAN
19. International Journal of Technical Research (IJTR) Vol. 4, Issue 2, Jul-Aug 2015 ISSN 2278-5787 Page
29 OPTIMIZE THE VARIOUS EFFECTS OF WELDING PARAMETERS OF AL PLATE BY TIG
WELDING by Jitender Bansal.
20. ISSN: 2319-8753 International Journal of Innovative Research in Science, Engineering and Technology,
Vol. 3, Issue 3, March 2014 Copyright to IJIRSET www.ijirset.com Effect of welding parameters on 5052
aluminium alloy weldments Using TIG welding by A. Raveendra.
21. ISSN: 2319-5967 International Journal of Engineering Science and Innovative Technology (IJESIT)
Volume 2, Issue 5, September 2013 462 Study The Influence of TIG Welding Parameters On Weld
Characteristics Of 5083 Aluminum Alloy by a Lakshman Singh.
22. International Journal of Interdisciplinary Research (IJIR) Vol-2, Issue-7, 2016 ISSN: 2454-1362,
http://www.onlinejournal.in Imperial Journal of Interdisciplinary Research (IJIR) Page 1161 Experimental
Investigation and Predict GTAW Process Parameters on AA6063 N. Ramakrishnan.
23. International Journal of Engineering Research-Online A Peer Reviewed International Journal Vol.4.,
Issue.3., 2016 (May-June) ISSN: 2321-7758 EXPERIMENTING NON DESTRUCTIVE TESTING
TECHNIQUES ON WELDING JOINTS SABITHA JAGANAGARI.
24. Journal of Mechanical Engineering and Sciences (JMES) ISSN (Print): 2289-4659; e-ISSN: 2231-8380
Volume 10, Issue 1, pp. 1817-1826, June 2016 © Universiti Malaysia Pahang, Malaysia DOI:
http://dx.doi.org/10.15282/jmes.10.1.2016.6.0174 Lap joint dissimilar welding of aluminium AA6061
and galvanized iron using TIG welding L.H. Shah.
25. International Journal of Scientific Engineering and Research (IJSER) www.ijser.in ISSN (Online): 2347-3878, Impact Factor (2014) Volume 3 Issue 7, July 2015 Licensed Under Creative Commons Attribution CC BY Evaluation of Tensile Strength and Distortion Control in GTAW Weldment of AA 6061 by Taguchi and Grey Relational Approach by a Imran A. Shaikh.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 AUTHOR

This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.