Reliability of Zirconia Toughened Alumina (ZTA) Ceramics Cutting Tools
DOI:
https://doi.org/10.61841/153m6531Keywords:
Zirconia Toughened Alumina,, hardened metallic,, flank put on,, Weibull & Anderson-darling test.Abstract
Analyses were regulated on zirconia toughened alumina principally based fired cutting rigging at various slicing speeds starting from 100 to 400 m/min on the solidified steels of around 340 BHN. Turning tests have been controlled utilizing CNC uncompromising level machining center for dependability of the hardware. Zirconia Toughened Alumina tests had been sorted out by methods for powder handling system. Weibull examination and Anderson dear methods are utilized for the dependability assessment the use of Minitab programming. The unwavering quality tests demonstrated that the devices are steady in their presentation and gave top notch results.
Keywords--
Downloads
References
1. Gokularatnam CV. Machining performance of phase transformation toughened alumina and partially stabilized zirconia composite cutting tools. J Eur Ceram Soc 1995; 12:445–60.
2. Piacentini M, Ruisi VF. Machining of steel with advanced ceramic cutting tools. Key Eng. Mater 1997; 114:105–34.
3. Sornakumar T. Advanced ceramic composite tool materials for metal cutting applications. Key Eng. Mater 1996; 114:173–88.
4. Vaidya Nathan N. Engineered ceramics for high speed machining. ASM International Conference Proceedings 1988:77–82.
5. Charles W. Ceramic cutting tools update. Manufact Eng. 1986; 100(April):81–6.
6. Hong X. Wear behavior and wear mechanism of ceramic tools in machining hardened alloy steel. Wear 1991; 139:439–51.
7. Brandt G. Flank and crater wear mechanisms of alumina based cutting tools when machining steel. Wear 1987; 112:39–56.
8. Cao, Y., Huang, L., Li. Y., Jermsittiparsert, K., Ahmadi-Nezamabad, H., & Nojavan, S. 2020. “Optimal Scheduling of Electric Vehicles Aggregator under Market Price Uncertainty Using Robust Optimization Technique.” International Journal of Electrical Power & Energy Systems 117: 105628.
9. Yu, D., Wang, Y., Liu, H., Jermsittiparsert, K., & Razmjooy, N. 2019. “System Identification of PEM Fuel Cells Using an Improved Elman Neural Network and a New Hybrid Optimization Algorithm.” Energy Reports 5: 1365-1374.
10. Tian, M., Ebadi, A., Jermsittiparsert, K., Kadyrov, M., Ponomarev, A., Javanshir, N., & Nojavan, S. 2019. “Risk-Based Stochastic Scheduling of Energy Hub System in the Presence of Heating Network and Thermal Energy Management.” Applied Thermal Engineering 159: 113825.
11. Yu, D., Wnag, J., Li, D., Jermsittiparsert, K., & Nojavan, S. 2019. “Risk-Averse Stochastic Operation of a Power System Integrated with Hydrogen Storage System and Wind Generation in the Presence of Demand Response Program.” International Journal of Hydrogen Energy (In press), DOI: 10.1016/j.ijhydene.2019.09.222.
12. Jabarullah, N., Jermsittiparsert, K., Melnikov, P., Maseleno, A., Hosseinian, A., & Vessally, E. 2019. “Methods for the Direct Synthesis of Thioesters from Aldehydes: A Focus Review.” Journal of Sulfur Chemistry (In press), DOI: 10.1080/17415993.2019.1658764.
13. Jiao, Y., Jermsittiparsert, K., Krasnopevtsev, A., Yousif, Q., & Salmani, M. 2019. “Interaction of Thermal Cycling and Electric Current on Reliability of Solder Joints in Different Solder Balls.” Materials Research Express 6 (10): 106302.
14. Yu, D., Ebadi, A., Jermsittiparsert, K., Jabarullah, N., Vasiljeva, M., & Nojavan, S. 2019. “Risk- constrained Stochastic Optimization of a Concentrating Solar Power Plant.” IEEE Transactions on Sustainable Energy (In press), DOI: 10.1109/TSTE.2019.2927735.
15. Jermsittiparsert, K., Sriyakul, T., Sutduean, J., & Singsa, A. 2019. “Determinants of Supply Chain Employees Safety Behaviours.” Journal of Computational and Theoretical Nanoscience 16 (7): 2959- 2966.
16. Sriyakul, T., Singsa, A., Sutduean, J., & Jermsittiparsert, K. 2019. “Effect of Cultural Traits, Leadership Styles and Commitment to Change on Supply Chain Operational Excellence.” Journal of Computational and Theoretical Nanoscience 16 (7): 2967-2974.
17. Sutduean, J., Singsa, A., Sriyakul, T., & Jermsittiparsert, K. 2019. “Supply Chain Integration, Enterprise Resource Planning, and Organizational Performance: The Enterprise Resource Planning Implementation Approach.” Journal of Computational and Theoretical Nanoscience 16 (7): 2975-2981.
18. Singsa, A., Sriyakul, T., Sutduean, J., & Jermsittiparsert, K. 2019. “Willingness of Supply Chain Employees to Support Disability Management at Workplace: A Case of Indonesian Supply Chain Companies.” Journal of Computational and Theoretical Nanoscience 16 (7): 2982-2989.
19. Jermsittiparsert, K. & Chankoson, T. 2019. “Behavior of Tourism Industry under the Situation of Environmental Threats and Carbon Emission: Time Series Analysis from Thailand.” International Journal of Energy Economics and Policy 9 (6): 366-372.
20. Romprasert, S. & Jermsittiparsert, K. 2019. “Energy Risk Management and Cost of Economic Production Biodiesel Project.” International Journal of Energy Economics and Policy 9 (6): 349-357.
21. Kasayanond, A., Umam, R., & Jermsittiparsert, K. 2019. “Environmental Sustainability and its Growth in Malaysia by Elaborating the Green Economy and Environmental Efficiency.” International Journal of Energy Economics and Policy 9 (5): 465-473.
22. Jermsittiparsert, K, Sriyakul, T., & Rodoonsong, S. 2013. “Power(lessness) of the State in the Globalization Era: Empirical Proposals on Determination of Domestic Paddy Price in Thailand.” Asian Social Science 9 (17): 218-225.
23. Jermsittiparsert, K, Sriyakul, T., & Pamornmast, C. 2014. “Minimum Wage and Country’s Economic Competitiveness: An Empirical Discourse Analysis.” The Social Sciences 9 (4): 244-250.
24. Jermsittiparsert, K., Pamornmast, C., & Sriyakul, T. 2014. “An Empirical Discourse Analysis on Correlations between Exchange Rate and Industrial Product Export.” International Business Management 8 (5): 295-300.
25. Jermsittiparsert, K., Sriyakul, T., Pamornmast, C., Rodboonsong, S., Boonprong, W., Sangperm, N., Pakvichai, V., Vipaporn, T., & Maneechote, K. 2016. “A Comparative Study of the Administration of Primary Education between the Provincial Administration Organisation and the Office of the Basic Education Commission in Thailand.” The Social Sciences 11 (21): 5104-5110.
26. Jermsittiparsert, K., Trimek, J., & Vivatthanaporn, A. 2015. “Fear of Crime among People in Muang-Ake, Lak-Hok, Muang, Pathumthani.” The Social Sciences 10 (1): 24-30.
27. Jermsittiparsert, K. & Akahat, N. 2016. “Fear of Crime among Students of Kalasin Rajabhat University.” Research Journal of Applied Sciences 11 (2): 54-61.
28. Brandt G, Mikus M. An electron microprobe and cathodolumine science study of chemical reactions between tool and work piece when turning steel with alumina-based ceramics. Wear 1987; 115: 243–63.
29. Jaw aid A. The performance of ceramic tool materials for the machining cast iron. Wear 1989; 135:147– 59.
30. Richards N, Use of ceramic tools for machining nickel based alloys. Int J Mach Tools Manufact 1989; 29:575– 88.
31. Wayne SF, Beljan ST. Wear of ceramic cutting tools in Ni-based super alloy machining. Tribal Trans 1990; 33:618–26.
32. Stachowiak GB. Wear behavior of ceramic cutting tools. Key Eng. Mater 1994; 96:137–64.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
