A REVIEW ON SYNTHESIS OF CONDUCTING WITH POLYANILINE RICE HUSK ASH SILICA NANOCOMPOSITES AND APPLICATION
DOI:
https://doi.org/10.61841/kkxwt612Keywords:
Nanostructures, Nanocompsite, silica, Rice husk Ash, Polyaniline, conductivityAbstract
Nanostructures have a prominent place in nanotechnology since more space can be used in different applications. In the past decades, a class of conductive polymers became famous because of their mechanical and electrical properties. Polyaniline is a conductive polymer popularly known as an environmentally stable and highly adjustable polymer given in an application form of powder, membranes, or loose fibers. Low-cost polyolefin and large-scale production are widely used in broad applications. Rice Husk Ash (RHA) is the byproduct of the rice mill industry, considered as waste material. Many types of research focused on RHA targets the high silicate content to be converted to silica after rice husk (RH) pyrolysis undertaken in a furnace with the temperature at 800°C. The sol-gel technique offered a simple route in producing silica from RHA, where 3-(chloropropyl)triethoxysilane (CPTES) is used to convert the RHA into high-quality silica. Polyaniline/Rice Husk Ash Silica Nanocomposites (PANI/RHACCl (SiO₂)NCs) are prepared via chemical oxidative polymerization and can be used in various applications such as supercapacitors, pseudocapacitors, coatings, metal absorption, chemicals, encapsulation of light-emitting organs, proton exchange membranes, diffusion membranes, devices, sensors, and flexible nanoelectronic devices, as well as drug delivery.
Downloads
References
[1] M. M. Rahman, M. M. Hussain, and A. M. Asiri, Creatine sensors based on nanomaterials. 2017.
[2] L. Tang and J. Cheng, “Nonporous silica nanoparticles for nanomedicine application,” Nano Today, vol. 8, no.
3, pp. 290–312, 2013, doi: 10.1016/j.nantod.2013.04.007.
[3] S. C. Nanoparticles, B. Liu, J. Syu, D. Wang, and A. Materials, “Preparation and Characterization of
Conductive,” vol. 4, no. 4, pp. 209–212, 2013, doi: 10.7763/IJCEA.2013.V4.296.
[4] M. Babazadeh, F. Zalloi, and A. Olad, “Fabrication of conductive polyaniline nanocomposites based on silica
nanoparticles via in-situ chemical oxidative polymerization technique,” Synth. React. Inorganic, Met. NanoMetal Chem., vol. 45, no. 1, pp. 86–91, 2015, doi: 10.1080/15533174.2013.818687.
[5] K. Mohammed, F. Adam, and T. Hussein, “Journal of the Taiwan Institute of Chemical Engineers A solid
sulfonic acid catalyst for the solvent free alkylation of phenol,” J. Taiwan Inst. Chem. Eng., 2013, doi:
10.1016/j.jtice.2013.04.018.
[6] A. Kaur, A. Kaur, and D. Saini, “A Review on Synthesis of Silica Nanocomposites With Conducting
Polymers : Polyaniline,” Res. Cell Int. J. Eng. Sci., vol. 6913, no. June, pp. 40–53, 2016.
[7] A. H. Jabbar, M. Q. Hamzah, S. O. Mezan, N. N. Hasan, and M. A. Agam, “A Continuous Process for the
Preparation, Characterization and Study Thermal Properties of Nickel Oxide Nanostructure,” vol. 9, no. 3, pp.
590–602, 2018.
[8] B. P. Jelle, R. Baetens, and A. Gustavsen, “Aerogel Insulation for Building Applications,” in The Sol-Gel
Handbook, vol. 3–3, 2015, pp. 1385–1412.
[9] J. Li, G. Wang, C. Ding, H. Jiang, and P. Wang, “Synthesis and evaluation of polystyrene-polybutadienepolystyrene-dodecafluoroheptyl methacrylate/polystyrene-polybutadiene-polystyrene hybrid antifouling
coating,” J. Colloid Interface Sci., vol. 434, pp. 71–76, 2014, doi: 10.1016/j.jcis.2014.07.043.
[10] I. Journal et al., “Energy Gap Investigation and Characterization of Kesterite Cu 2 Znsns 4 Thin Film for
Solar ... Energy Gap Investigation and Characterization of Kesterite Cu 2 Znsns 4 Thin Film for Solar Cell,”
vol. 4, no. January, pp. 4–8, 2018.
[11] M. Chen, M. Qi, L. Yao, B. Su, and J. Yin, “Effect of surface charged SiO2nanoparticles on the
microstructure and properties of polyimide/SiO2nanocomposite films,” Surf. Coatings Technol., vol. 320, pp.
59–64, 2017, doi: 10.1016/j.surfcoat.2017.01.120.
[12] M. Abbasian and L. Ahmadkhani, “Synthesis of conductive PSt-g-PANi / TiO 2 nanocomposites by metal
catalyzed and chemical oxidative polymerization,” Des. Monomers Polym., vol. 5551, pp. 1–11, 2016, doi:
10.1080/15685551.2016.1187435.
[13] C. Huang, X. Qian, and R. Yang, “Thermal conductivity of polymers and polymer nanocomposites,” pp. 1–64.
[14] S. Fe, “Structural , Optical and Magnetic Properties,” 2019.
[15] R. Balint, N. J. Cassidy, and S. H. Cartmell, “Acta Biomaterialia Conductive polymers : Towards a smart
biomaterial for tissue engineering,” Acta Biomater., vol. 10, no. 6, pp. 2341–2353, 2014, doi:
10.1016/j.actbio.2014.02.015.
[16] R. P. Toledo, C. E. S. Dias, D. R. Huanca, and W. J. Salcedo, “Sensors and Actuators B : Chemical Physical
and chemical characterization of PANI / SiO 2 / MPS heterostructure to be used as high sensitivity
chemosensor for naphthalene,” Sensors Actuators B. Chem., vol. 277, no. March, pp. 445–455, 2018, doi:
10.1016/j.snb.2018.09.043.
[17] M. Alice et al., “Structural and Morphological Characteristics of Polyaniline Synthesized in Pilot Scale,” vol.
9, pp. 39–47, 2017, doi: 10.5028/jatm.v9i1.726.
[18] A. Popov, B. Brasiunas, L. Mikoliunaite, G. Bagdziunas, A. Ramanavicius, and A. Ramanaviciene,
“( PEDOT ) and PANI-PEDOT films electrochemically deposited on transparent indium thin oxide based
electrodes,” Polymer (Guildf)., vol. 172, no. January, pp. 133–141, 2019, doi: 10.1016/j.polymer.2019.03.059.
[19] N. Roosz, M. Euvard, B. Lakard, C. C. Buron, N. Martin, and L. Viau, “Synthesis and characterization of
polyaniline-silica composites: Raspberry vs core-shell structures. Where do we stand?,” J. Colloid Interface
Sci., vol. 502, pp. 184–192, 2017, doi: 10.1016/j.jcis.2017.04.092.
[20] H. Song et al., “Synthesis and characterization of conductive polyaniline nanocomposite containing
fluorene,” High Perform. Polym., vol. 29, no. 10, pp. 1192–1198, Dec. 2017, doi:
10.1177/0954008316673138.
[21] S. Pandey, “Journal of Science : Advanced Materials and Devices Highly sensitive and selective
chemiresistor gas / vapor sensors based on polyaniline nanocomposite : A comprehensive review,” J. Sci. Adv.
Mater. Devices, vol. 1, no. 4, pp. 431–453, 2016, doi: 10.1016/j.jsamd.2016.10.005.
[22] A. Liu, L. H. Bac, J.-S. Kim, B.-K. Kim, and J.-C. Kim, “Synthesis and Characterization of Conducting
Polyaniline-Copper Composites,” J. Nanosci. Nanotechnol., vol. 13, no. 11, pp. 7728–7733, 2013, doi:
10.1166/jnn.2013.7831.
[23] N. Roosz, M. Euvard, B. Lakard, C. C. Buron, N. Martin, and L. Viau, “Journal of Colloid and Interface
Science Synthesis and characterization of polyaniline-silica composites : Raspberry vs core-shell structures .
Where do we stand ?,” vol. 502, pp. 184–192, 2017.
[24] R. C. K. Montalbo, M. C. Marquez, N. P. Putri, and D. H. Kusumawati, “Synthesis of PANi-SiO2
Nanocomposite with In- Situ Polymerization Method : Nanoparticle Silica ( NPS ) Amorphous and
Crystalline Phase Synthesis of PANi-SiO2 Nanocomposite with In-Situ Polymerization Method :
Nanoparticle Silica ( NPS ) Amorphous and Crys.”
[25] K. C. Chang et al., “Preparation and comparative properties of membranes based on PANI and three
inorganic fillers,” Express Polym. Lett., vol. 8, no. 3, pp. 207–218, 2014, doi:
10.3144/expresspolymlett.2014.24.
[26] B. Engineering, “THE ADSORPTION OF AMOXICILLIN BY MESOPOROUS SILICA SUPPORTED
POLYMERS,” no. January, 2018.
[27] J. Wen, Y. Tian, C. Hang, Z. Zheng, H. Zhang, and Z. Mei, “Fabrication of Novel Printable Electrically
Conductive Adhesives ( ECAs ) with Excellent Conductivity and Stability Enhanced by the Addition of
Polyaniline Nanoparticles,” 2019.
[28] H. Zengin and B. Erkan, “Synthesis and characterization of polyaniline / silicon dioxide composites and
preparation of conductive films,” no. June 2009, 2010, doi: 10.1002/pat.1492.
[29] T. Films, C. Polymers, and G. S. Applications, “Chapter 3 Synthesis of Polyaniline ( PANI ),” no. 2014, pp.
1–22.
[30] M. Liu, G. Shi, L. Zhang, and G. Zhao, “Electrode modified with toluidine blue-doped silica nanoparticles ,
and its use for enhanced amperometric sensing of hemoglobin,” pp. 1951–1959, 2008, doi: 10.1007/s00216-
008-2103-z.
[31] S. Askar, L. Li, and J. M. Torkelson, “Polystyrene-Grafted Silica Nanoparticles: Investigating the Molecular
Weight Dependence of Glass Transition and Fragility Behavior,” Macromolecules, vol. 50, no. 4, pp. 1589–
1598, 2017, doi: 10.1021/acs.macromol.7b00079.
[32] W. Cheng et al., “pH-Sensitive Delivery Vehicle Based on Folic Acid-Conjugated Polydopamine-Modified
Mesoporous Silica Nanoparticles for Targeted Cancer Therapy,” ACS Appl. Mater. Interfaces, vol. 9, no. 22,
pp. 18462–18473, 2017, doi: 10.1021/acsami.7b02457.
[33] “THE HETEROGENATION OF SACCHARIN , MELAMINE AND SULFONIC ACID ONTO RICE
HUSK ASH SILICA AND THEIR CATALYTIC ACTIVITY IN ESTERIFICATION REACTION KASIM
MOHAMMED HELLO,” 2010.
[34] K. Mohammed, A. Abbas, J. K. Shneine, and J. Nelson, “South African Journal of Chemical Engineering
Simple method for functionalization of silica with alkyl silane and organic ligands,” South African J. Chem.
Eng., vol. 25, no. May, pp. 159–168, 2018, doi: 10.1016/j.sajce.2018.05.001.
[35] Fatima Amer Abd Algabar, Sawsan Hassan Authman & KJK, ''Cytotoxicity anticancer activities of
staphyloxanthin against breast, liver hepatocellular and lung cancer cell'', Biochem Cell Arch, 2018. 18 (1),
25-30.
[36] F. Adam, K. M. Hello, and H. Osman, “Applied Catalysis A : General Esterification via saccharine mediated
silica solid catalyst,” vol. 365, pp. 165–172, 2009, doi: 10.1016/j.apcata.2009.06.013.
[37] F. Adam, H. Osman, and K. M. Hello, “Journal of Colloid and Interface Science The immobilization of 3-
( chloropropyl ) triethoxysilane onto silica by a simple one-pot synthesis,” J. Colloid Interface Sci., vol. 331,
no. 1, pp. 143–147, 2009, doi: 10.1016/j.jcis.2008.11.048.
[38] Y. Shen, “Rice Husk Silica Derived Nanomaterials for Battery Applications – A Literature Review Rice Husk
Silica Derived Nanomaterials for Battery Applications – A Literature Review For Table of Content Only,”
2017, doi: 10.1021/acs.jafc.6b04777.
[39] D. Ghime and P. Ghosh, “Journal of Water Process Engineering Heterogeneous Fenton degradation of oxalic
acid by using silica supported iron catalysts prepared from raw rice husk,” J. Water Process Eng., vol. 19, no.
June, pp. 156–163, 2017, doi: 10.1016/j.jwpe.2017.07.025.
[40] P. Van Der Voort, K. C. Vrancken, D. E. Leyden, and J. G. Speight, “Book Re V iews,” vol. 118, no. 12, pp.
3071–3072, 1996.
[41] S. Mallakpour and M. Naghdi, Revised 2 Polymer / SiO 2 Nanocomposites : Production and Applications, no.
April. 2018.
[42] T. Ribeiro, C. Baleizão, and J. P. S. Farinha, “Functional films from silica/polymer nanoparticles,” Materials
(Basel)., vol. 7, no. 5, pp. 3881–3900, 2014, doi: 10.3390/ma7053881.
[43] T. J. Al-hasani, H. Hamied, K. M. Hello, and F. Adam, “Catalytic esterification via silica immobilized p -
phenylenediamine and dithiooxamide solid catalysts,” Arab. J. Chem., vol. 10, pp. S1492–S1500, 2017, doi:
10.1016/j.arabjc.2013.04.030.
[44] I. A. Rahman and V. Padavettan, “Synthesis of Silica nanoparticles by Sol-Gel: Size-dependent properties,
surface modification, and applications in silica-polymer nanocompositesa review,” J. Nanomater., vol. 2012,
2012, doi: 10.1155/2012/132424.
[45] P. Li, C. Ni, G. Shi, D. Zhang, and Y. Xu, “Fabricating composite supercapacitor electrodes of polyaniline
and aniline-terminated silica by mechanical agitation and sonication,” J. Solid State Electrochem., vol. 22, no.
4, pp. 1249–1256, 2018, doi: 10.1007/s10008-017-3870-2.
[46] J. Tang, J. Sun, J. Xu, and W. Li, “Grafting of poly[styrene-co-N-(4-vinylbenzyl)-N,N-diethylamine] polymer
film onto the surface of silica microspheres and their application as an effective sorbent for lead ions,” J. Appl.
Polym. Sci., vol. 131, no. 6, pp. 1–10, 2014, doi: 10.1002/app.39973.
[47] B.-T. Liu, J.-R. Syu, and D.-H. Wang, “Preparation and Characterization of Conductive SiO2-Polyaniline
Core-Shell Nanoparticles,” Int. J. Chem. Eng. Appl., vol. 4, no. 4, pp. 209–212, 2013, doi:
10.7763/IJCEA.2013.V4.296.
[48] W. A. El-Said, M. E. El-Khouly, M. H. Ali, R. T. Rashad, E. A. Elshehy, and A. S. Al-Bogami, “Synthesis of
mesoporous silica-polymer composite for the chloridazon pesticide removal from aqueous media,” J. Environ.
Chem. Eng., vol. 6, no. 2, pp. 2214–2221, 2018, doi: 10.1016/j.jece.2018.03.027.
[49] C. M. Caldas, L. F. Calheiros, and B. G. Soares, “Silica–polyaniline hybrid materials prepared by inverse
emulsion polymerization for epoxy-based anticorrosive coating,” J. Appl. Polym. Sci., vol. 134, no. 47, pp. 1–
9, 2017, doi: 10.1002/app.45505.
[50] N. M. Barkoula, B. Alcock, N. O. Cabrera, and T. Peijs, “Fatigue properties of highly oriented polypropylene
tapes and all-polypropylene composites,” Polym. Polym. Compos., vol. 16, no. 2, pp. 101–113, 2008, doi:
10.1002/pc.
[51] H. Zou, S. Wu, and J. Shen, “Polymer/silica nanocomposites: preparation, characterization, properties, and
applications.,” Chem. Rev., vol. 108, no. 9, pp. 3893–3957, 2008, doi: 10.1021/cr068035q.
[52] C. F. Lee, H. H. Tsai, L. Y. Wang, C. F. Chen, and W. Y. Chiu, “Synthesis and properties of
silica/polystyrene/polyaniline conductive composite particles,” J. Polym. Sci. Part A Polym. Chem., vol. 43,
no. 2, pp. 342–354, 2005, doi: 10.1002/pola.20515.
[53] X. X. Liu, Y. Q. Dou, J. Wu, and X. Y. Peng, “Chemical anchoring of silica nanoparticles onto polyaniline chains via electro-co-polymerization of aniline and N-substituted aniline grafted on surfaces of SiO2,”
Electrochim. Acta, vol. 53, no. 14, pp. 4693–4698, 2008, doi: 10.1016/j.electacta.2008.01.064.
[54] Fatima Amer Abd Algabar& Batool Abdalameer Baqer, ''Molecular Detection and Sequence Analysis of (Lux
S Gene) In Serratia Marcescens Isolates that Producing Biofilm'', International Journal of Advanced Science,
2020 .29 (5), 5278 – 5287.
[55] M. Kim, S. Cho, J. Song, S. Son, and J. Jang, “Controllable Synthesis of Highly Conductive Polyaniline
Coated Silica Nanoparticles Using Self-Stabilized Dispersion Polymerization,” 2012, doi:
10.1021/am300979s.
[56] H. Gu et al., “Giant Magnetoresistive Phosphoric Acid Doped Polyaniline − Silica Nanocomposites,” 2013.
[57] O. F. Ag and D. P. P. Rha, “Synthesis , Surface and Textural Characterization,” Dig. J. Nanomater.
Biostructures, vol. 11, no. 3, pp. 731–740, 2016.
[58] P. Liu, Y. Wang, X. Wang, C. Yang, and Y. Yi, “Polypyrrole-Coated samarium oxide nanobelts: Fabrication,
characterization, and application in supercapacitors,” J. Nanoparticle Res., vol. 14, no. 11, 2012, doi:
10.1007/s11051-012-1232-7.
[59] A. A. Mosafer, M. R. Toosi, and M. Asghari, “Effect study of hexagonal mesoporous silica/polyaniline
nanocomposite on the structural properties of polysulfone membranes and its heavy metal removal
efficiency,” Sep. Sci. Technol., vol. 52, no. 10, pp. 1775–1786, 2017, doi: 10.1080/01496395.2017.1297455.
[60] Y. Zhang et al., “Review of macroporous materials as electrochemical supercapacitor electrodes,” J. Mater.
Sci., vol. 52, no. 19, pp. 11201–11228, 2017, doi: 10.1007/s10853-017-0955-3.
[61] S. A. Ebrahim, M. E. Harb, M. M. Soliman, and M. B. Tayel, “Preparation and characterization of a
pseudocapacitor electrode by spraying a conducting polymer onto a flexible substrate,” J. Taibah Univ. Sci.,
vol. 10, no. 2, pp. 281–285, 2016, doi: 10.1016/j.jtusci.2015.07.004.
[62] L. Zu et al., “Preparation and electrochemical characterization of mesoporous polyaniline-silica
nanocomposites as an electrode material for pseudocapacitors,” Materials (Basel)., vol. 8, no. 4, pp. 1369–
1383, 2015, doi: 10.3390/ma8041369.
[63] P. Li, C. Ni, G. Shi, D. Zhang, and Y. Xu, “Fabricating composite supercapacitor electrodes of polyaniline
and aniline-terminated silica by mechanical agitation and sonication,” 2017.
[64] C. Weng et al., “Electrochimica Acta Preparation of gold decorated SiO 2 @ polyaniline core – shell
microspheres and application as a sensor for ascorbic acid,” Electrochim. Acta, vol. 95, pp. 162–169, 2013,
doi: 10.1016/j.electacta.2013.01.150.
[65] L. Wang, X. Lu, S. Lei, and Y. Song, “Graphene-based polyaniline nanocomposites: preparation, properties
and applications,” J. Mater. Chem. A, vol. 2, no. 13, pp. 4491–4509, 2014, doi: 10.1039/C3TA13462H.
[66] M. Q. Hamzah, S. O. Mezan, A. N. Tuama, A. H. Jabbar, and M. A. Agam, “Study and Characterization of
Polystyrene/Titanium Dioxide Nanocomposites (PS/TiO2 NCs) for Photocatalytic Degradation Application :
a Review,” Int. J. Eng. Technol., vol. 7, pp. 538–543, 2018.
[67] L. Wang, X. Lu, S. Lei, and Y. Song, “Graphene-based polyaniline nanocomposites: preparation, properties
and applications,” J. Mater. Chem. A, vol. 2, no. 13, pp. 4491–4509, 2014, doi: 10.1039/C3TA13462H.
[68] M. Abbasian and L. Ahmadkhani, “Synthesis of conductive PSt-g-PANi / TiO 2 nanocomposites by metal
catalyzed and chemical oxidative polymerization,” Des. Monomers Polym., vol. 5551, pp. 1–11, 2016, doi:
10.1080/15685551.2016.1187435.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 AUTHOR
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
